LM-79 Testing | LM-79 Test Approved Methods

What are the limitations of LM-79?

Posted on

What are the limitations of LM-79?

As we all know about the strength of LM 79. Everything has its pros and cons. Let us have a look on the drawbacks of LM 79.

  • LM 79 depicts the parameters of the individual products. So the obtained Parameters cannot be used to access alike products.
  • Other limitation is the sample size. It does not state any sample size. So, the manufacturer provides only one sample instead of supplying more. This thus increases the vulnerability of lesser quality products.
  • This can be used only to determine complete luminary instead of LED used ( as based on absolute photometry) , which can produce different results due to quality of accessories used like glass, thermal effect, lenses etc.

If you’re Buyers Demanding for LM-79 Testing– Contact Now!

Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations, Fill the Enquiry form:

What is LM 79 Test methodology?

Posted on

What is LM 79 Test methodology?

LM 79 is an approved method that describes the procedure to be followed and precautions to be observed in performing reproducible measurements of total Luminous flux, electrical power, luminous intensity distribution, chromaticity of Solid-State lighting products for illumination purposes under standard conditions.

LM 79 covers- LED based SSL products with control electronics and heat sinks. Luminaries (fixtures incorporating light source) as well integrated LED lamps.

LM 79 doesn’t cover fixtures without a light source, SSL products that require external operating.

LM 79


Test method for total luminous flux Measurements:

The total luminous flux of SSL product shall be measured with an Integrating Sphere or Goniophotometer. The method may be chosen depending upon what other measurements quantities (color, intensity distribution) need to be measured., the size of SSL products, and other requirements.

The integrating sphere is suited for total luminous flux and color measurements of integrated LED lamps and relative small size LED luminaries. Advantage of using integrating sphere is that it does not requires the “ Dark Room”., and also it is less time consuming.

The Goniophotometer provides measurements of Luminous Intensity Distribution as well as total luminous flux. It can take measurements of larger size luminaries as well as small size luminaries. It has to be installed in Dark Room. Measurements in goniophotometer are time consuming.

  Integrating Sphere Goniophotometer
Conditions No Dark room Dark Room
Size of SSL Small Size luminaries Large size as well as small size Luminaries
Measurements Total Luminous Flux Light Intensity Distribution , Total Luminous Flux
Duration of Test Fast Measurements Time consuming as compared to Sphere photometer.

If you’re Buyers Demanding for Luminaries  Testing– Contact Now!

Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations, Fill the Enquiry form:

 

LM 79 Testing Report for LED Street Light 45W and 72W

Posted on Updated on

LM-79 Testing and Certification for LED Street light in Bangalore Karnataka India

LM-79 Testing and  Certification Report for LED Street Light 45W and 72W

If you are looking for LM-79 Testing Report for LED Street Light 45W and 72W, ITC India Can Help You! ITC India NABL Accredited Laboratory one of the best Service Provider of Electrical Safety Testing, Luminaire Testing, LM-79 Testing, IP Testing, and etc..

ITCIndia discipline of Electrical (T-1811), Electronics (T-3509) and photometry (T-3510), serving its satisfied customers for last 5 years. Lab is fully equipped with the highly accurate Machines to test LM 79, IP Rating and etc. It owns Integrating sphere as well as Goniophotometer.

LM79 is an approved method for taking electrical & photometric measurements of SSL solid-state lighting products. It covers total flux light output, electrical power, efficacy, chromaticity, & intensity distribution. The five required metrics on the LED Lighting Facts label come from LM-79 testing results.

The Testing to be conducted is as follows:-

 

S.NO. PRODUCT Testing as per standard
1 LED Street Light (45W) Test to be conducted under LM 79:

 

A.     Measurement of Total Luminous Flux and Luminous Efficacy

 

B.     Color Characteristics (Chromaticity Coordinates, Correlated Color Temperature and Color Rendering Index)

 

C.     Light Intensity Distribution Test

2 LED Street Light (72W) Test to be conducted under LM 79:

 

A.     Measurement of Total Luminous Flux and Luminous Efficacy

 

B.     Color Characteristics (Chromaticity Coordinates, Correlated Color Temperature and Color Rendering Index)

 

C.     Light Intensity Distribution Test

  • LM 79 Test Report will be on basis of 30 Mins to 2 Hrs Stablization Time depending upon the size of the Luminaire.
  • Test Report of LM 79 with NABL Logo can only be issued for LED Lamps & Tube Lights only, for the following parameters: CCT, Color Coordinate, Luminous Flux (Lumen).

Popular Links of LM-79 Testing:-

  1. How to do LM-79 Testing?
  2. LM-79 Testing | LM-79 Test Approved Methods
  3. LM-79 Testing Report for LED lights, LM-79 Test Requirements & Procedure, lm 79 certificate
  4. LM-79 Testing for LED DownLight | LED Down Light Testing | LM 79 testing labs in India
  5. LED Luminaires Testing Services
  6. LM 79 testing for LED product
  7. LM-79 Testing Service in India

Top Searches related to lm79 testing:

lm-79 test report                         lm 80 testing

lm79 testing                                  lm 79 test procedure

lm 79 standard                            lm-80

lm 79 testing labs in india       ies lm-80

If you’re Buyers Demanding for LM-79 Testing– Contact Now!

ITC India has around 5000 clients from LED lighting division from All over India.

If you are interested to Get LM 79 Test Report, You can Please feel free to Ask for Quotation.

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations, Fill the Enquiry form:

Lm-79 Testing | Lm 79 test report | Lm 79 test procedure India

Posted on Updated on

LM-79 Testing, Lm 79 Test report, LM 79 Test procedure, India

ITC India is a NABL accredited laboratory in discipline of Electrical (T-1811), Electronics (T-3509) and photometry (T-3510), serving its satisfied customers for last 5 years. Laboratory is fully equipped with the highly accurate Machines to test LM 79. It owns a Integrating sphere as well as the Goniophotometer.  Qualified and experienced engineer are appointed to perform the desired tests.

Gone are those days when we use incandescence (tungsten filament) or fluorescent (mercury atoms) bulb. They are replaced by LED’s Now; this is an era of SSL (LED) as ……There is innumerable reason for the rise in LED’s which cannot be counted on finger tips. It is beneficial to both USERS as well as to the nation. Its superior features make it so promising that one cannot deny using LED’s.  The features of LED’s are, its low power consumption, digitally controllable,   Low maintenance, Ultra long source life, no UV or IR radiations, No mercury content. SSL uses semiconductors material to convert Electricity into light.  LED’s are non carbon materials.

Efficacy is the quality parameter for LED: it is measure in Lumen per watt. Higher efficacy means high energy efficient. Another quality factor is lifetime and last but not the least is Color rendering Index (CRI). CRI measures the ability of light source to reproduce the color of various objects in comparison with natural light source.

How LM-79 testing can help assess LED luminaries quality and performance?

AS LM79 report provides you with the Photometric as well as electrical parameters with a spectrum Test report. The photometric parameters are luminous flux, Efficacy and Radiant Power, CIE colorimetric Parameters (coordinates Color rendering Index (CRI), color coordinate Temperature (CCT) Duv Value, and light Intensity Distribution .Current, Voltage, Power factor, Power and frequency are the electrical parameters. It Focus on the efficiency and CRI, which are the quality parameter. Efficiency measures how much electrical energy is converting into light energy. Power factor is another electrical metric for LED driver performance and often a key parameter for street lighting due to the large number of these luminaries connected to the power grid.  As far as for lifetime, LM 80 covers that part.

What is the LM-79 test methodology?

 LM 79 is approved method to test Photometric and electrical measurements of Solid state lightning. It describes the procedure and precaution to be observed during measurements. This approved method covers LED based SSL products with control electronics and heat sinks incorporated, that is , those devices that require only AC main power or a DC voltage power supply to operate. This document does not covers SSL products that require external operating circuits, or external heat sink. LM 79 covers SSL product in a form of luminaries (fixture incorporating light source) as well as integrated LED lamps.

Why do we need it?

We need it to access the quality and other parameters due to increasing competition in the market. It provides the efficiency and power factor.   

How is LM-79 different from other test methods used for conventional lighting products?

This approved method is a guide developed for the measurements of SSL products. While many other standards for photometric measurements of light sources and luminaries are available, these standards are separated for measurements of lamps and luminaries. Since the current SSL products are in the form of luminaries or lamps, and LED light source in luminaries are not easily separated as replaceable lamps, these existing standard cannot be applied directly to SSL products. This necessitates the use of absolute photometry. This test method uses absolute photometry where as other standard uses relative photometry in short.

Now lets us clear about relative and absolute photometry.

S.NO Absolute Photometry Relative Photometry
1 Total lumen output of a luminary (bulb with fixture) Total Lumen output of a bare lamp is measured.
2 Method used to measure LED performance. Method used to measure Bare bulb and system performance.
3 Output is relative to an easy measured condition.

 

Output is measured in calibrated units under specific operating and environment conditions, ambient temperature, input voltage and orientation.
4 Specific lamp performance does not matter,

 

Lamps and system performance matters.

 

5 Use for SSL products For NON SSL products

What are the LM-79 test outcomes?

The outcome of the LM 79 is the REPORT providing all the required parameters as per LM 79.

They are ……

  1. CIE colorimetric parameters
  2. Chromaticity coordinate (x)
  3. Chromaticity coordinate (y)
  4. Chromaticity coordinate (u’)
  5. Chromaticity coordinate (v)
  6. Chromaticity coordinate (v’)
  7. Correlated color temperature(Tc)
  8. Duv Value
  9. Color Rendering Index(Ra)
  10. Photometric Parameters
  11. Luminous Flux( Lumen)
  12. Luminous Efficacy( Lm/W)
  13. Radiant Power
  14. Electric Parameters
  15. Input Voltage(V)
  16. Current(A)
  17. Power(W)
  18. Power Factor
  19. Frequency(Hz)
  20. Test information

Ambient Temperature, Stabilization Time, Total Operating Time, Sphere Dia, Photometric method or instrument used Wavelength range in nm of spectroradiometer.

Along with this a SPECTRUM TEST REPORT is also issued.

What are the limitations of LM-79?

  • Chips, Packages, or Modules requiring external heat sinks or operating circuits are not covered
  • Does not state the sampling size.

Is there a future scope for improvement in the LM-79 test?

Yes of course, there is always a scope for improvement in all areas.

Range/criteria of acceptance of CCT, CRI & Lumens may be defining to establish a harmonization of parameters globally.

Top Searches related to LM 79 Tests for LED Tube Lights:

lm 79 standard                                           lm-80

lm 79 test report                                        lm79 and lm80 standards

lm-79 test procedure                            lm 79 testing labs in india

ies lm-80                                                   lm 79 80 standards

How to do LM-79 Testing?                 LM-79 Testing | LM-79 Test Approved Methods

LM-79 Testing Report                          LM-79 Testing Service in India

If you’re Buyers Demanding for LM-79 Testing– Contact Now!

ITC India has around 5000 clients from LED lighting division from All over India.

Get LM 79 Test Report, You can Please feel free to Ask for Quotation.

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations, Fill the Enquiry form:

LM-79 Testing for LED Batten | LM-79 Test Reports | lm 79 testing labs

Posted on

LM-79 Testing for LED Batten, LM-79 Test Reports, lm 79 testing labs in India

LM-79 Testing for LED Batten, LM-79 Test Reports, lm 79 testing labs in India

If you Require Testing of LED Batten as per LM-79. ITC India Can Help You! ITC India One of the Best LM-79 testing Laboratory in India. If you have any requirement related LED Batten Testing, you can feel free to contact us. (Call: +91-8196980555)

ITC India NABL Accredited Electrical Safety Testing Laboratory organizing LM 79 testing Testing for LED Batten lights, in all over India. If you are looking for NABL Approved LM-79 Testing Laboratory in your Area, ITC India Can do LM-79 Test for LED Batten lights in a Week.

ITC India NABL Approved Electrical Safety Testing laboratory under ELECTRICAL, ELECTRONICS and PHOTOMETRY testing with certificate no. T-3509, T-3570 & T-1811. ITC India Laboratory is fully equipped with high accuracy Measuring Instruments and trained personnel to provide testing and certification Services for Electrical and Electronic equipments. ITC Lab is following the procedure as required by International Standard IEC 17025 and is already certified for ISO/IEC 17025.

The Testing to be conducted is as follows:-

S.NO. PRODUCT Testing as per standard
1 LED Batten Test to be conducted under LM 79:

a. Measurement of Total Luminous Flux

& Luminous Efficacy

b. Color Characteristics (Chromaticity

Coordinates, Correlated Color

Temperature & Color Rendering Index)

Photometric and Electric Testing as per IES LM-79:

IES LM-79 Testing Approved Method:- Electrical and Photometric Measurements of Solid-State Lighting Products includes three sections:

  • Section 9: Total Flux Measurements
  • Section 10: Luminous Intensity Measurements
  • Section 12: Color Characteristics Measurements. Manufacturers must also submit the IES file containing Section 10 measurements to verify compliance with the zonal lumen density or spacing criteria requirements.

Get Instant Quote, Please send us the following details:

  1. Product Technical Specifications and Brochure
  2. Product Images
  3. Total Number of samples Required: 2

Popular Search about LM-79 Testing:-

  1. How to do LM-79 Testing?
  2. LM-79 Testing | LM-79 Test Approved Methods
  3. LM-79 Testing Report for LED lights, LM-79 Test Requirements & Procedure, lm 79 certificate
  4. LM-79 Testing for LED DownLight | LED Down Light Testing | LM 79 testing labs in India
  5. LED Luminaires Testing Services
  6. LM 79 testing for LED product
  7. LM-79 Testing Service in India

If you’re Buyers Demanding for LM-79 Testing– Contact Now!

ITC India has around 5000 clients from LED lighting division from All over India.

If you are interested to Get LM 79 Test Report, You can Please feel free to Ask for Quotation.

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations, Fill the Enquiry form:

 

LM-79 testing for COB Downlight and COB Zoomlight in Mumbai Maharashtra India

Posted on Updated on

LM-79 testing for COB Downlight and COB Zoomlight in Mumbai Maharashtra India

LM-79 testing for LED COB Downlight and LED COB Zoom Light and LED COB Spot Lights in Mumbai Maharashtra India

ITC India NABL Accredited Electrical Safety Testing Lab conducting LM 79 testing and photometric Testing for LED COB Down light, LED COB Zoom light and LED COB Spot Lights in Mumbai Maharashtra India. If you are looking for LM-79 Testing Lab for COB Down light, COB Zoom light and COB Spot Lights Testing, ITC India Can Do!

ITC India One of the Best LM-79 testing Laboratory Mumbai Maharashtra India. If you have any requirement related LED Testing, you can feel free to contact us.

We are NABL Approved Electrical Safety Testing laboratory under ELECTRICAL, ELECTRONICS and PHOTOMETRY testing with certificate no. T-3509, T-3570 & T-1811. ITC India Laboratory is fully equipped with high accuracy Measuring Instruments and trained personnel to provide testing and certification Services for Electrical and Electronic equipments. ITC Lab is following the procedure as required by International Standard IEC 17025 and is already certified for ISO/IEC 17025.

 

The Testing to be conducted is as follows:-

S.NO. PRODUCT Testing as per standard
1. COB Down light Test to be conducted under LM 79:

a. Measurement of Total Luminous Flux

& Luminous Efficacy

b. Color Characteristics (Chromaticity

Coordinates, Correlated Color

Temperature & Color Rendering Index)

c. Light Intensity Distribution Test

2. COB Zoom light Test to be conducted under LM 79:

a. Measurement of Total Luminous Flux

& Luminous Efficacy

b. Color Characteristics (Chromaticity

Coordinates, Correlated Color

Temperature & Color Rendering Index)

c. Light Intensity Distribution Test

For Instant Quote and Get More details about LM-79 Testing, Kindly send us the following details:

  1. Product Technical Specifications and Brochure
  2. Product Images
  3. Total Number of samples Required: 2

Popular Search about LM-79 Testing:-

  1. How to do LM-79 Testing?
  2. LM-79 Testing | LM-79 Test Approved Methods
  3. LM-79 Testing Report for LED lights, LM-79 Test Requirements & Procedure, lm 79 certificate
  4. LM-79 Testing for LED DownLight | LED Down Light Testing | LM 79 testing labs in India
  5. LED Luminaires Testing Services
  6. LM 79 testing for LED product
  7. LM-79 Testing Service in India

If you’re Buyers Demanding for LM-79 Testing and Certification– Contact Now!

ITC India has around 5000 clients from LED lighting division from All over India. if you are interested to Get LM 79 Test Report, You can Please feel free to Ask for Quotation.

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations, Fill the Enquiry form:

LM 79 Testing lab in India | laboratory For LED Testing ITCIndia

Posted on Updated on

LM 79 Testing at ITC India Pvt Ltd | LM 79 Testing laboratory in India

If you are looking for LM-79 Testing Laboratory in India, ITCIndia Can Do. ITC India NABL Accredited Electrical Safety testing Laboratory Providing LM-79 Testing.

ITC India have NABL accreditation Testing laboratory under ELECTRICAL , ELECTRONICS and  PHOTOMETRY testing with certificate no. T-3509 , T-3570 & T-1811. ITC India Testing Laboratory is fully equipped with high accuracy Measuring Instruments and  trained personal to provide testing and certification Services for Electrical and  Electronic equipments. ITC India Laboratory is following the procedure as required by International Standard IEC 17025 and is already certified for ISO/IEC 17025. ITC India offering this LM 79 testing services in all over India like , Mumbai , Chennai ,Ahmedabad , New Delhi, Pune, Banglore, Kolkata

ITC India Pvt Ltd. has recently installed the  Goniophotometers LED/SSL at its Mohali laboratory. This is in addition to integrated sphere in the field of photometry testing of lamps & luminaires. With this additional testing facility, ITC India is able to perform complete photometry testing on all kinds of lamps and luminaires including LED lamps, LED Street Light, LED Downlights, outdoor lighting, LED floodlight, LED Tube lights, LED spotlight , led light strips,  led light bars, led light fixtures, and luminaires.

ITC India Laboratory  is totally equipped with high accuracy testing instruments  like spectrometer , integrating sphere , Goniophotometer , power meter , LED driver tester , safety tester , environmental chamber , and many more to provide a total testing solution for LED based product

IES LM-79-08 standard

Approved Method: Electrical and photometric Measurements of Solid-state Lighting Product

Photometric Results

Colorimetric Parameters:

  1. Chromaticity coordinates: (Chroma x / Chroma y / Chroma u(u’) / Chroma v / Chroma v’)
  2. Correlated Color Temperature (CCT)
  3. Duv Value
  4. Color Ratio
  5. Peak Wavelength (nm)
  6. Half Bandwidth (nm)
  7. Dominant Wavelength (nm)
  8. Color Purity
  9. Color Rendering Index (CRI – Ra)

Photometric Parameters:

  1. Total Luminous Flux (Lumens)
  2. Luminous Efficacy (Lumens/Watt)
  3. Radiant Power (Watts)

Electrical Results:

  1. Input Power (Watts)
  2. Input Voltage (Volts )
  3. Input Current (Amps)
  4. Power Factor
  5. Input Frequency (Hz)

Additional Parameters:

  1. Stabilization Time (Light and Power) = 60 minutes
  2. Test Geometry Configuration = 4π
  3. Spectroradiometer = (Lisun LMS-9000A Plus)
  4. Ambient Temperature = 25.0°C

ITC India Lab can do the testing of your LED product against the different standard like LM 79, IS 16106, IEC 60598-1, IEC 61347-2-13, IEC 62384, IEC62722-2-1, IEC 62031, IS 15885(part2/sec13), IS 16103, IS 16102, IEC 62612, and IEC 60969 etc  

LM 79 Testing for Solid State lighting; It includes below parameters like total lumens , CCT , CRI , Lm/watt , Luminous intensity distribution & electrical parameter like voltage , current , power & power factor ….

Popular Search about LM-79 Testing:-

  1. How to do LM-79 Testing?
  2. LM-79 Testing | LM-79 Test Approved Methods
  3. LM-79 Testing Report for LED lights, LM-79 Test Requirements & Procedure, lm 79 certificate
  4. LM-79 Testing for LED DownLight | LED Down Light Testing | LM 79 testing labs in India
  5. LED Luminaires Testing Services
  6. LM 79 testing for LED product
  7. LM-79 Testing Service in India

ITC India have around 5000 clients from LED lighting division from All over India. if you are interested to Get LM 79 Test Report.If you’re Buyers Demanding for LM-79 Testing – Contact Now!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations to fill out the Enquiry form below:

ILm 79 testing lab in India, Lm 79 Testing lab in India, LM-79 Testing labs in india, Searches related to Lm 79 testing lab in India, led testing labs in india, lm 79 testing labs in bangalore, lm 79 testing labs in india, led testing lab in india, lm 79 test report, lm-79 test procedure, ITC India test house, NABL, Searches related to Lm 79 Testing lab in India, led testing labs in india, lm 79 testing labs in bangalore India, lm 79 test report Itcindia, led testing laboratory in india, lm-79 test procedure in India, ITCindia test house, NABL approved lab, Searches related to LM-79 testing labs in india, ITC India led testing labs in india, lm 79 testing labs in bangalore Karnataka, lm 79 testing report India, lm-79 test procedure