LED testing and LED test services for light measurement
What is LM 79 Test methodology?
What is LM 79 Test methodology?
LM 79 is an approved method that describes the procedure to be followed and precautions to be observed in performing reproducible measurements of total Luminous flux, electrical power, luminous intensity distribution, chromaticity of Solid-State lighting products for illumination purposes under standard conditions.
LM 79 covers- LED based SSL products with control electronics and heat sinks. Luminaries (fixtures incorporating light source) as well integrated LED lamps.
LM 79 doesn’t cover– fixtures without a light source, SSL products that require external operating.
LM 79
Test method for total luminous flux Measurements:
The total luminous flux of SSL product shall be measured with an Integrating Sphere or Goniophotometer. The method may be chosen depending upon what other measurements quantities (color, intensity distribution) need to be measured., the size of SSL products, and other requirements.
The integrating sphere is suited for total luminous flux and color measurements of integrated LED lamps and relative small size LED luminaries. Advantage of using integrating sphere is that it does not requires the “ Dark Room”., and also it is less time consuming.
The Goniophotometer provides measurements of Luminous Intensity Distribution as well as total luminous flux. It can take measurements of larger size luminaries as well as small size luminaries. It has to be installed in Dark Room. Measurements in goniophotometer are time consuming.
| Integrating Sphere | Goniophotometer | |
| Conditions | No Dark room | Dark Room |
| Size of SSL | Small Size luminaries | Large size as well as small size Luminaries |
| Measurements | Total Luminous Flux | Light Intensity Distribution , Total Luminous Flux |
| Duration of Test | Fast Measurements | Time consuming as compared to Sphere photometer. |
If you’re Buyers Demanding for Luminaries Testing– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]
Get Instant Quotations, Fill the Enquiry form:
LED OT light Testing
LED OT light Testing laboratory
If you are looking for LED OT light Testing Laboratory in India, ITC India Can Help You! ITC India one of the best LED OT light Testing Service Provider in India. ITCIndia Can do LED OT light Testing as per IEC 60601-1 Standard
LED Operation Theater Lights
Applicable Standards:
- IEC 60601-1
Essential Tests:
- Power input
- Protection against accidental contact
- Leakage current and patient auxiliary current
- Voltage drop test
- Touch current
- Earth Leakage Current
- Dielectric Strength Test
- Insulation Resistance
- Humidity preconditioning treatment
- Single fault condition
- Resistance to environmental stress
- Creepage and air clearance
- Pollution degree classification
- Protection against mechanical hazards
- Stability tests
- Protection against excessive temperature and other hazards
- Ingress protection tests like IP 20
- Push test , impact test
- Drop test
Snapshot of the LED OT light Test report issued: Total no of pages of full report is 122
If you’re Buyers Demanding for LED OT light Testing– Contact Now!
ITC India has around 5000 clients from LED OT light division from All over India.
If you are interested to Get
LED OT light Test Test Report, You can Please feel free to Ask for Quotation.
Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]
Get Instant Quotations, Fill the Enquiry form:
LED Lights Testing
LED Lighting Testing Laboratory
If you are looking for LED Testing for LED Lights, ITC India Can Help You! ITC India NABL Accredited Laboratory one of the best LED Light Testing Service Provider in India, ITC India Can Do Endurance & Temperature Testing, IP 65 Testing, IP 66 Testing, IP 67 Testing, IS 15885 (P2/S13) Testing, IS 16104 Testing, LM 79/IS 16106 Testing Luminaire Testing, and etc..
ITCIndia discipline of Electrical (T-1811), Electronics (T-3509) and photometry (T-3510), serving its satisfied customers for last 5 years. Laboratory is fully equipped with the highly accurate Machines to test Endurance & Temperature Testing, IP 65 Testing, IP 66 Testing, IP 67 Testing, IS 15885 (P2/S13) Testing, IS 16104 Testing, LM 79/IS 16106 Testing, Luminaire Testing and etc. It owns Integrating sphere as well as Goniophotometer.
The Testing to be conducted is as follows:-
| S.NO. | PRODUCT | Testing as per standard | No of Samples |
| 1. | LED Light | Endurance and Temperature Testing | 01 |
| IP 65 | 02 | ||
| IP 66 | 02 | ||
| IP 67 | 02 | ||
| IS 15885 (P2/S13) | 17 | ||
| IS 16104 | 02 | ||
| Testing to be conducted under LM 79/IS 16106
a. Measurement of Total Luminous Flux & Luminous Efficacy b. b. Color Characteristics (Chromaticity Coordinates, Correlated Color Temperature & Color Rendering Index)
|
01 | ||
| c. Light Intensity Distribution Testing
|
01 |
Note:
- 1. Service Tax @ 15% will be applicable & charged over and above the Testing Fees.
- LM 79 Test Report will be on basis of 30 Minutes to 2 Hrs Stabilization Time depending upon the size of the Luminaire.
- Test Report of LM 79 with NABL Logo can only be issued for LED Lamps & Tube Lights only,
