LM 79 testing by NABL – Accredited lab in just 5 days
What are LM 79 Test Outcomes?
What are LM 79 Test Outcomes?
LM-79 is approved test method for electrical and photometric measurements of Solid State Lighting Products. It describes the procedure in measuring total luminous flux, electrical power, luminous intensity distribution, chromaticity under standard conditions. It covers LED based SSL products with control electronics and heat sink incorporated with AC or DC power supply. This does not include LED chips, LED package or LED module but luminaries (fixtures incorporating light source) as well as integrated LED lamps.
The equipment used in LM-79 is integrated sphere and goniophotometer.
Integrating Sphere Goniophotometer
The test report shall list all significant data for each SSL product tested together with performance data. The outcomes of the LM-79 test are:
- Correction factor applied ( e.g. spectral mismatch, self absorption , intensity distribution etc.)
- Measured total luminous flux( lumen(lm)), input voltage(v), current(a), power(w), Luminous intensity distribution(cd), efficacy(lm/w)
- Color quantities( chromaticity coordinates, CCT, CRI )
- Spectral power distribution
- Bandwidth of spectoradiometer, if spectral distribution and/or color quantities are reported.
- Statement of uncertainties (if required)
- Deviation from standard operating procedures, if any.
Here is the link of a test report issued by our prestigious company. LM 79 Test Outcomes
If you’re Buyers Demanding for LM-79 Testing– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]
Get Instant Quotations, Fill the Enquiry form:
What is LM 79 Test methodology?
What is LM 79 Test methodology?
LM 79 is an approved method that describes the procedure to be followed and precautions to be observed in performing reproducible measurements of total Luminous flux, electrical power, luminous intensity distribution, chromaticity of Solid-State lighting products for illumination purposes under standard conditions.
LM 79 covers- LED based SSL products with control electronics and heat sinks. Luminaries (fixtures incorporating light source) as well integrated LED lamps.
LM 79 doesn’t cover– fixtures without a light source, SSL products that require external operating.
LM 79
Test method for total luminous flux Measurements:
The total luminous flux of SSL product shall be measured with an Integrating Sphere or Goniophotometer. The method may be chosen depending upon what other measurements quantities (color, intensity distribution) need to be measured., the size of SSL products, and other requirements.
The integrating sphere is suited for total luminous flux and color measurements of integrated LED lamps and relative small size LED luminaries. Advantage of using integrating sphere is that it does not requires the “ Dark Room”., and also it is less time consuming.
The Goniophotometer provides measurements of Luminous Intensity Distribution as well as total luminous flux. It can take measurements of larger size luminaries as well as small size luminaries. It has to be installed in Dark Room. Measurements in goniophotometer are time consuming.
| Integrating Sphere | Goniophotometer | |
| Conditions | No Dark room | Dark Room |
| Size of SSL | Small Size luminaries | Large size as well as small size Luminaries |
| Measurements | Total Luminous Flux | Light Intensity Distribution , Total Luminous Flux |
| Duration of Test | Fast Measurements | Time consuming as compared to Sphere photometer. |
If you’re Buyers Demanding for Luminaries Testing– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]
Get Instant Quotations, Fill the Enquiry form:
Photometric Testing Experts
Searches related to Photometric Testing Experts, What is Photometric Testing, Photometric Test Procedure, Photometric Test Report, Photometric Testing India, LM-79 Testing Experts, Photometric Testing labs, LED Testing Experts, Photometric Testing for LED Lighting
If you are looking for Photometric Testing Laboratory for LED Lighting In your Area, ITCIndia Electrical Safety testing Laboratory Approved from NABL. ITC India one of the best Photometric Testing Laboratory in India, Mumbai, Chennai, Ahmedabad, New Delhi, Pune, Kolkata, Bangalore, Hyderabad, Surat, Visakhapatnam.
ITCIndia “Institute of Testing and Certification India Pvt. Ltd” are a leading testing lab having a NABL accreditation under ELECTRICAL, ELECTRONICS and PHOTOMETRY testing with certificate no. T-3509, T-3570 and T-1811. ITCIndia Lab is following the procedure as required by International Standard IEC 17025 and is already certified for ISO/IEC 17025.
As the development of LED technology continues to grow and diversify, the need for consistent and standardized testing procedures for LED has become more prevalent than ever. ITCIndia is NABL Accredited laboratory for Photometric Testing for LED Lighting, LM 79 Testing.
Institute of Testing and Certification India Pvt. Ltd has made strides to stay current with the new testing standard LM-79 set forth by the IESNA (Illuminating Engineering Society of North America). In addition, “ITCIndia” testing is now a priority when testing our LED light systems for more reliable results.
ITCIndia Lab has made strides to stay current with the new testing standard LM-79 set forth by the IEC/EN 60598. In addition, ITC INDIA testing is now a priority when testing our LED light systems for more reliable results. Fixtures tested by LM-79 standards will now feature a Lighting Facts label provided through the program created by the IEC/EN.
LM-79 Electrical and Photometric Measurements of Solid-State Lighting Products
Approved method describing procedures and precautions in performing reproducible measurements of LEDs:
- Total luminous flux
- Electrical powers
- Luminous Intensity distribution
- Efficacy (lm/watt)
- Chromaticity
How To do Photometric Testing?
Check Our Photometric Testing Scope
Absolute Photometry Basis
- LM-79 requires complete luminaire testing
- Traditionally, photometric evaluation of lighting products is based on separate tests for lamps and luminaires
- For SSL products, LED lamps typically cannot be separated from their luminaire because of heat effects
Relative vs. Absolute Photometry
Relative testing – Lamps of interest and luminaire are measured separately. Then the actual light distribution and intensity of the complete luminaire of interest is derived by normalization of the test data
Absolute testing – The actual light distribution and intensity of the luminaire of interest is measured directly from the complete luminaire.
For your better understanding, we are going to show you the Photometric Test report of latest LED in the following:
Learn more about this Photometric test >
If you’re Buyers Demanding for Photometric Testing– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]
Get Instant Quotations, Fill the Enquiry form:
What is the LM-79 Testing of LED Lights?
LM-79 Testing for LED Lights
LM-79 is an approved method for taking electrical and photometric measurements of SSL products. It covers total flux (light output), electrical power, efficacy, chromaticity, and intensity distribution. The five required metrics on the LED Lighting Facts label come from LM-79 testing results.
ITCIndia Offering you a complete choice of services which include LM 79 Testing, Safety Testing, Electrical Testing, IEC/EN/IS/BS/ISO Testing, IP testing as per IEC 60529 and Cable Gland Testing.
ITCIndia Laboratory has been awarded accreditation by the NABL under the Energy Efficient Lighting Products Program. This includes LM-79 accreditation for Solid State Lighting Luminaires – Total Flux Measurements (Luminous Efficacy) and Solid State Lighting Luminaires –Luminous Intensity Measurements.
Our accreditation also includes IES LM-80:2008 for Solid State Lighting Luminaires-Lumen Maintenance (SSL Life Tests).
ITCIndia laboratory is also on the LED Lighting Facts Approved Labs List.
ITCIndia can do safety testing against below international standard like
- IEC 61010-1 : lab instruments
- IEC 60204-1 : COntrol panel
- IEC 60595 : LED luminary
- IEC 61347 : Lamp control gear
- IEC 60950 : Information technology equipments
- IEC 60601 : Electromedical equipmets
- IEC 60065 : Audio video & similar product
- IEC 61439 : Low voltage switchgear & control gear assemblies
- IEC 60034 : rotating electrical machine and more contact us for more information…
LM-79 Definition and Scope
IES LM-79 is an approved method for testing electrical and photometric measurements of solid-state lighting products. LM-79 contains procedures for performing reproducible measurements of LEDs properties, including: total flux, electrical power, efficacy and chromaticity.
The scope of LM-79 applies to LED products that incorporate control electronics and heat sinks. This covers complete LED luminaires and integrated LED sources. It does not include bare LED chips or LED based products without a light source.
LM-79 testing requires complete luminaire testing on an absolute photometric basis. Typically lighting products are evaluated on a relative photometric basis, where separate tests are done for lamps an luminaires. However, for solid state lighting products the LED lamps typically cannot be separated from their luminaires. The absolute photometric testing required measures the light distribution and light intensity of the complete luminaire.
LM-79 Procedures and Conditions
- Ambient Conditions
- Maintain temperature at 25 degrees C +/-1 degree C (within 1M)
- Mounting – limit thermal transfer
- Limited air flow
- Power Supply
- AC waveshape limit to harmonic RMS of 3%
- Voltage regulation to +/- 2%
- Seasoning and Stabilization
- Testing Orientation
- Electrical Settings
- Instrumentation
LM-79 Testing Methods
Integrating sphere systems are used to measure the total luminous flux and color for LM-79. This can be performed with a photometer (total luminous flux) or a spectral radiometer (spectral radiant flux). Utilizing a spectral radiometer and integrating sphere is the preferred method, which derives total luminous flux and color qualities form spectral radiant flux measurements.
Goniophotometer systems are also used for LM-79 testing to measure luminous intensity distribution. The Goniophotometer system tests derive total luminous flux and provide color characteristics including CCT and CRI.
LM-79 Test Outputs and Calculations
- Total Luminous Flux
- Luminous Intensity Distribution
- Electrical Power
- Luminous Efficacy
- Chromaticity
- CCT
- CRI
For your better understanding, we are going to show you the LM-79 test report of latest LED in the following:
Learn more about this Lm-79 test >
If you’re Buyers Demanding for LM-79 Testing for LED Lights– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]
Get Instant Quotations, Fill the Enquiry form:
LM-79 Testing Service in India
Find LM-79 Testing Service in Your Area
ITCIndia specializes in the measurement of Solid State Lighting per IES standards including NABL accredited LM-79 luminaire testing. ITCIndia laboratory is NABL Approved LM-79 Luminaire Testing, LM-79 Luminaire Testing for ENERGY STAR® for SSL, and is accredited to provide test and measurement under ISO 17025.
ITC India NABL approved Testing Laboratory (with Certificate No. T 1811 attached herewith) with specialization to test against EN and IEC standards for electrical safety leading to CE/NIST/IEC certification. Our Lab is fully equipped with high accuracy measuring testing Instruments and trained personal to provide testing & certification services for different type of products according to IEC Standards. Some of which are IEC 60335–1, IEC 60601, IEC 61010, IEC 60204, IEC 60598, IEC 60950, IEC 61427, BS EN 50262, etc…..
The laboratory is following the procedure as required by International Standard IEC/ISO 17025 and is already certified for IEC/ISO 17025 by NABL.ITC INDIA performing ELECTRICAL SAFETY TESTING for the following:
EMC/EMI Testing Machinery Testing Luminaries and Lightning Testing Electro Medical Equipments Testing Laboratory Equipment Testing Household Appliances Testing IT and Telecom Equipment Testing Environmental Testing Battery Testing. LM 79
ITCIndia’s LM-79 luminaire and lamp testing fully evaluates the assembled luminaire for total flux, electrical power, efficacy (lm/watt), chromaticity, and angular distribution of light.
ITCIndia provides LM-79 luminaire and lamp testing reports for:
- ENERGY STAR®
- LED Lighting Facts
- DesignLight Consortium
The standard LM-79 luminaire test report includes:
- Luminaire Efficacy
- Zonal Lumen Density
- Visible spectral power distribution
- CRI
- CCT
- CQS
- Chromaticity coordinates
- Color over angle
- Various electrical measurements
- IES file
- Equipment
ITCIndia testing facilities are equipped with multiple type-c moving mirror color goniophotometers and integrating spheres up to 3 meters in diameter – ideal for testing large troffers and LED street lights.
ITCIndia laboratory features both a Type A and Type C Goniometer for testing a wide variety of luminaires.
What is LM-79 Luminaire Testing?
LM-79 Luminaire Testing
LM-79-08. It is the Illuminating Engineering Society of North America (IESNA) approved method for the Electrical and Photometric Measurements of Solid-State Lighting. It measures an LED luminaire or integral lamp as a whole system according to a standard process using specified equipment.
IES LM-79 Electrical and Photometric Measurements of Solid-State Lighting Products
Approved method describing procedures and precautions in performing reproducible measurements of LED Lights:
- Total luminous flux
- Electrical powers
- Luminous Intensity distribution
- Efficacy (lm/watt)
- Chromaticity
LM-79 Luminaire Testing Scope:
Applies to LED-based products incorporating control electronics and heat sinks, that is, those devices that require only AC mains power or a DC voltage power supply to operate.
Absolute Photometry Basis:
- LM-79 requires complete luminaire testing
- Traditionally, photometric evaluation of lighting products is based on separate tests for lamps and luminaires (Relative)
- For SSL products, LED lamps typically cannot be separated from their luminaire because of heat effects (Absolute)
Relative vs. Absolute Photometry:
- Relative testing – Lamps of interest and luminaire (with reference lamp) are measured separately. Then the actual light distribution and intensity of the complete luminaire of interest is derived by normalization of the test data
- Absolute testing – The actual light distribution and intensity of the luminaire of interest is measured directly from the complete luminaire.
Kindly send us the following Details, So that we can provide you quotation for the same:
- Product Name, Technical Specifications and Brochure
- Product Images
- Total Number of samples Required: 2
Need guidance? Our LED Luminaire Testing FAQ will help!
Information about Federal and State LED Lighting Programs and Resources.
Call us at 8196980555 or email [email protected] for price information or an immediate quote today.
Trending Searches related LM-79 Testing:
How to improve my LED Light?, Who is the CEO of ITCIndia?, Who’s actually doing LM-79 Testing, Who is doing LM-79 Testing?, What is the Cost of LM-79 testing in India?, Who is LM-79 Testing Expert?, What is the cost for LM-79 test?, How much does it cost to test LED?, Where can I find Lm-79 Test Lab?, Where is LM-79 Testing Lab?, How Do I Get Lm-79 Testing Service?, I am looking for LM-79 Testing Laboratory?, One of the Best Lm-79 Test Laboratory in India, near me LM-79 Testing Lab, LM-79 Testing Lab near me, LM-79 Luminaire & Lamp Testing Laboratory, LM-79 Testing (LEDs), Understanding LM-79 Reports, LM 79 testing by NABL – Accredited lab in just 5 days, LM 79 Test Laboratory – Over 10 years of experience, LED/SSL Luminaires. NABL Accredited Laboratory, LID, Lumens, CRI, CCT and power factor . Contact us Now, LED Test & Measurement, LM-79 Luminaire Testing
If you have any query regarding LM 79 Testing, Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | [email protected] | ITC India Pvt. Ltd
