LED Test & Measurement

Thermal Testing for LED Lights

Posted on February 9, 2017

Thermal Testing for LED Lights, Thermal Testing of LEDs, Thermal testing of road luminaires

If you are looking for Thermal Testing Laboratory for LED Lighting In your Area, ITCIndia NABL Approved Electrical Safety testing Laboratory In India. ITC India one of the best Thermal Testing Laboratory in India, Mumbai, Chennai, Ahmedabad, New Delhi, Pune, Kolkata, Bangalore, Hyderabad, Surat, Visakhapatnam.

ITCIndia “Institute of Testing and Certification India Pvt. Ltd” are a leading testing lab having a NABL accreditation under ELECTRICAL, ELECTRONICS and PHOTOMETRY testing with certificate no. T-3509, T-3570 and T-1811. ITCIndia Lab is following the procedure as required by International Standard IEC 17025 and is already certified for ISO/IEC 17025.

Thermal test is one of the important tests while testing LED luminaries, so we would like to have its basic knowledge.

Thermal test is performed for normal and abnormal conditions. We will peep inside both the conditions respectively.

The motive of thermal test is that the Lamp, part of the luminary, supply wiring, mounting surface should not attain the temperature which can cause injury. The parts like handles should not be too hot to be touched. Same scenario is for the track mounted luminaries are there. Track mounted Luminaries are tested as per clause 12.4.1. Draught proof chamber is specially designed for this particular test. While performing the test, the through wiring and the looping in wiring shall be loaded to the maximum value allowed by the size of the wire, or at a value prescribed by the manufacturer in the installation instructions.

After the test, none of the temperature shall exceed the values given in table 12.1 & 12.2 of IEC 60598-1.

While performing the thermal test in abnormal condition, luminaries are tested in abnormal conditions. The temperature shall not exceed as mentioned in table 12.3, 12.4, and 12.5. If the luminary possesses motor, the test is performed in most critical condition.

Clause 12.6 is applied to the luminary classified for mounting on normally flammable surfaces with a control gear. Clause 12.7 is thermal test in regard to fault conditions in lamp control gear or electronics devices incorporated in thermoplastics luminaries.

Temperature Measurement Data as per client specification

The sample was operated until constant temperatures were obtained. A temperature was considered
constant if the sample was operating for at least three hours and upon three successive readings – taken at
15 minute intervals – were within one degree and were not rising.
Thermocouples were attached at locations described in the results by means of cement made of water

Table-1

No. of LED’s:		48	Ambient Temperature:		25°C ± 1°C
Total no. of test points:		55	No. of Rows		4
Sr. no.	Measured Temperature at Pt.			Measured Temperature
Row-1
1	LED 1 (Ts)			56.3
2	LED 2 (Ts)			56.7
3	LED 3 (Ts)			55.8
4	LED 4 (Ts)			55.1
5	LED 5 (Ts)			56.4
6	LED 6 (Ts)			55.9
7	LED 7 (Ts)			55.2
8	LED 8 (Ts)			57.1
9	LED 9 (Ts)			57.4
10	LED 10 (Ts)			56.6
11	LED 11 (Ts)			56.9
12	LED 12 (Ts)			57.2
Row- 2
13	LED 13 (Ts)			54.6
14	LED 14 (Ts)			55.8
15	LED 15 (Ts)			57.6
16	LED 16 (Ts)			57.9
17	LED 17 (Ts)			55.5
18	LED 18 (Ts)			57.4
19	LED 19 (Ts)			56.9
20	LED 20 (Ts)			57.6
21	LED 21 (Ts)			56.5
22	LED 22 (Ts)			57.5
23	LED 23 (Ts)			56.3
24	LED 24 (Ts)			56.9
Row -3
25	LED 25 (Ts)			55.5
26	LED 26 (Ts)			54.9
27	LED 27 (Ts)			55.9
28	LED 28 (Ts)			56.0
29	LED 29 (Ts)			56.3
30	LED 30 (Ts)			55.9
31	LED 31 (Ts)			56.2
32	LED 32 (Ts)			54.3
33	LED 33 (Ts)			55.2
34	LED 34 (Ts)			55.9
35	LED 35 (Ts)			56.3
36	LED 36 (Ts)			56.8
Row- 4
37	LED 37 (Ts)			55.5
38	LED 38 (Ts)			55.9
39	LED 39 (Ts)			56.1
40	LED 40 (Ts)			57.5
41	LED 41 (Ts)			56.2
42	LED 42 (Ts)			55.9
43	LED 43 (Ts)			57.2
44	LED 44 (Ts)			57.7
45	LED 45 (Ts)			57.3
46	LED 46 (Ts)			56.9
47	LED 47 (Ts)			57.5
48	LED 48 (Ts)			57.8
TP Point Pcb -1
1.	TP			56.5
TP Point Pcb -2
1.	TP			55.6
TP Point Pcb -3
1.	TP			55.9
TP Point Pcb -4
1.	TP			56.1
TP Point Pcb -5
1.	TP			56.2
TP Point Pcb -6
1.	TP			56.9
Ballast Tc Test point
1.	Tc			53.4

ITC India Pvt. Ltd. is accompanying which possesses the full scope of IEC 60598-1. For any query please write us at …..

If you’re Buyers Demanding for Thermal Testing– Contact Now

Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations, Fill the Enquiry form:

How LM-79 testing can help assess LED luminary quality and performance?

Posted on January 10, 2017

How LM-79 testing can help assess LED luminary quality and performance?

We all believe in buying quality products. Discovery of LED is boon to our world. LED has replaced all the traditional lightning systems because of its quality, life and performance. Manufacturers are switching from manufacturing traditional lightning to produce LED lighting. Many of the manufacturers are making unsubstantial claims regarding colour quality, luminous flux (lm), efficacy (lm/w) and general quality. This can Lead to LED degradation. To ensure quality, a series of test has to be performed on LED luminaries for its long term survival. This is served by LM 79 test method. It is not only the LED but the whole SSL has to qualify all the tests.

For special purpose, it may be useful to determine the characteristics of SSL products when they are operated at other than standard conditions described in the approved method.

Photometric testing includes measurements of total radiant flux, luminous flux, Efficacy (lm/w), chromaticity, correlated color temperature (CCT), and color rendering index (CRI), Light Intensity Distribution (cd). Radiant flux, expressed in watts, is a measurement of the total power of electromagnetic radiation (light) emitted from the luminary or lamp. Luminous flux is a weighted measurement based on human visual perception.

The above measured parameters help to access the LED luminary quality and performance.

ITC india Pvt Ltd is a leading company to test LM 79, company has both the highly accurate equipments “The Integrating Sphere” & “ The Goniophotometer” installed at its premises.

ITC india is a NABL accredited lab having full scope of LM 79( certificate no. T-3510.)

If you’re Buyers Demanding for LED Luminaries Lamps Testing– Contact Now!

Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations, Fill the Enquiry form:

This entry was posted in LED Testing, LM 79 Testing, Luminaries LED Product Testing and tagged Assessment of Advanced Solid-State Lighting, Assessment of Solid-State Lighting Products, Energy-saving lighting testing, How to check in LM, LED Lab Test, LED Luminaire Reliability, LED Luminaire Testing to Include LM-79 Photometric, LED Street Lighting Assessment, LED Test & Measurement, list of approved testing laboratories in india for LM, list of approved testing labs in india for LM, list of labs under lm, list of testing laboratories in india for LM, LM 79 Test Laboratory - LED/SSL Luminaires, lm 79 testing labs in india, lm 80 report, LM Test Labs, LM testing laboratories, lm79 and lm80 standards, Most Comprehensive LED Luminaire Test, NABL approved test labs for LM, need/requirement in LM, need/requirement in LM Testing, need/requirement under LM, need/requirement under LM Testing, Performance measurement of lamps and luminaires, performance testing of lighting products, sample lm79 report, Understanding LM-80: Measuring Lumen Maintenance of LED Light, what are the Parameters Required under LM testing, WHAT is LM Testing, what to check in LM, who do LM Tests/testing, Who will do testing in LM, Why testing is necessary under LM, Why to check in LM.

LED Lights Testing

Posted on October 7, 2016 Updated on March 1, 2018

LED Lighting Testing Laboratory

If you are looking for LED Testing for LED Lights, ITC India Can Help You! ITC India NABL Accredited Laboratory one of the best LED Light Testing Service Provider in India, ITC India Can Do Endurance & Temperature Testing, IP 65 Testing, IP 66 Testing, IP 67 Testing, IS 15885 (P2/S13) Testing, IS 16104 Testing, LM 79/IS 16106 Testing Luminaire Testing, and etc..

ITCIndia discipline of Electrical (T-1811), Electronics (T-3509) and photometry (T-3510), serving its satisfied customers for last 5 years. Laboratory is fully equipped with the highly accurate Machines to test Endurance & Temperature Testing, IP 65 Testing, IP 66 Testing, IP 67 Testing, IS 15885 (P2/S13) Testing, IS 16104 Testing, LM 79/IS 16106 Testing, Luminaire Testing and etc. It owns Integrating sphere as well as Goniophotometer.

The Testing to be conducted is as follows:-

S.NO.	PRODUCT	Testing as per standard	No of Samples
1.	LED Light	Endurance and Temperature Testing	01
		IP 65	02
		IP 66	02
		IP 67	02
		IS 15885 (P2/S13)	17
		IS 16104	02
		Testing to be conducted under LM 79/IS 16106 a. Measurement of Total Luminous Flux & Luminous Efficacy b. b. Color Characteristics (Chromaticity Coordinates, Correlated Color Temperature & Color Rendering Index)	01
		c. Light Intensity Distribution Testing	01

Note:

1. Service Tax @ 15% will be applicable & charged over and above the Testing Fees.
LM 79 Test Report will be on basis of 30 Minutes to 2 Hrs Stabilization Time depending upon the size of the Luminaire.
Test Report of LM 79 with NABL Logo can only be issued for LED Lamps & Tube Lights only,

Get Instant Quotations, Fill the Enquiry form:

This entry was posted in LED Bulb Testing, LED Street Light Testing, LED Testing, LED Tube Light Safety Testing and tagged Endurance & Temperature Testing, How to Test an LED Bulb, How to Test LED, how to test led light bar, how to test led light bulbs, How to Test LED Lights, IP 65 Testing, IP 66 Testing, IP 67 Testing, IS 15885 (P2/S13) Testing, IS 16104 Testing, led light test tool, led light testing equipment, led light testing equipment in india, led light testing procedure, LED Lights Testing Ahmedabad, LED Lights Testing Bangalore, LED Lights Testing Chennai, LED Lights Testing Delhi, LED Lights Testing Gurgaon, LED Lights Testing India, LED Lights Testing kolkata, LED Lights Testing Mumbai, LED Lights Testing Pune, LED Test & Measurement, LED testing and LED test services for light measurement, LED Testing Hyderabad, led testing instruments, led testing standards, LED Testing Surat, LED Testing Visakhapatnam, LM 79/IS 16106 Testing, Searches related to LED Light Testing, Testing LEDs.

LM-79 Testing for LED Solar Street Light | LM-79 Test Report | lm 79 testing labs in India

Posted on July 2, 2016 Updated on July 2, 2016

Lm-79 Testing Laboratory for LED Solar Lights in India

ITCIndia is One of the Best LM-79 Testing Laboratory in India. Contact Now! And fulfill your testing Requirements for Tenders and etc.

If you are looking for LM-79 Testing Laboratory for your LED Solar Lights, ITCIndia Can Do. ITC India NABL Accredited Electrical Safety testing Laboratory Providing LM-79 Testing for your LED Solar Lights,

Testing parameter under LM 79 testing for LED Solar Lights:

Measurement of Total Luminous Flux & Luminous Efficacy
Color Characteristics (Chromaticity Coordinates, Correlated Color Temperature & Color Rendering Index)
Light Intensity Distribution Test.

Voltage, current, wattage, Power factor

The Testing to be conducted is as follows:-

PRODUCT: Solar Street Light | Testing as per standard:

Test to be conducted under LM 79:
a. Measurement of Total Luminous Flux
& Luminous Efficacy
b. Color Characteristics (Chromaticity

C.Coordinates, Correlated Color
Temperature & Color Rendering Index)

If you want details and quotations for Lm-79 Testing, Kindly send us the following details:

Product Technical Specifications
Product Images
Product Brochure

Popular Search about LM-79 Testing:-

If you’re Buyers Demanding for LM-79 Testing Services – Contact Now!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations to fill out the Enquiry form below:

This entry was posted in LM 79 Testing, LM-79 Testing Ahmedabad, LM-79 Testing for LED Solar Street Light, LM-79 Testing | LM-79 Test Approved Methods, Luminaries LED Product Testing and tagged 30W Led Street Light LM79 Test Report, Agra, Ahmedabad, Ahmednagar, Aizawl, Ajitgarh (Mohali), Ajmer, Akola, Alappuzha, Aligarh, Alirajpur, Allahabad, Almora, Alwar, Ambala, Ambedkar Nagar, Amravati, Amreli district, Amritsar, Anand, Anantapur, Anantnag, Angul, Anjaw, Anuppur, Araria, Ariyalur, Arwal, Ashok Nagar, Auraiya, Aurangabad, Azamgarh, Badgam, Bagalkot, Bageshwar, Bagpat, Bahraich, Baksa, Balaghat, Balangir, Balasore, Ballia, Balrampur, Banaskantha, Banda, Bandipora, Bangalore Rural, Bangalore Urban, Banka, Bankura, Banswara, Barabanki, Baramulla, Baran, Bardhaman, Bareilly, Bargarh (Baragarh), Barmer, Barnala, Barpeta, Barwani, Bastar, Basti, Bathinda, Beed, Begusarai, Belgaum, Bellary, Betul, Bhadrak, Bhagalpur, Bhandara, Bharatpur, Bharuch, Bhavnagar, Bhilwara, Bhind, Bhiwani, Bhojpur, Bhopal, Bidar, Bijapur, Bijnor, Bikaner, Bilaspur, Birbhum, Bishnupur, Bokaro, Bongaigaon, Boudh (Bauda), Budaun, Bulandshahr, Buldhana, Bundi, Burhanpur, Buxar, Cachar, Central Delhi, Chamarajnagar, Chamba, Chamoli, Champawat, Champhai, Chandauli, Chandel, Chandigarh, Chandrapur, Changlang, Chatra, Chennai, Chhatarpur, Chhatrapati Shahuji Maharaj Nagar, Chhindwara, Chikkaballapur, Chikkamagaluru, Chirang, Chitradurga, Chitrakoot, Chittoor, Chittorgarh, Churachandpur, Churu, Coimbatore, Cooch Behar, Cuddalore, Cuttack, Dadra and Nagar Haveli, Dahod, Dakshin Dinajpur, Dakshina Kannada, Daman, Damoh, Dantewada, Darbhanga, Darjeeling, Darrang, Datia, Dausa, Davanagere, Debagarh (Deogarh), Dehradun, Deoghar, Deoria, Dewas, Dhalai, Dhamtari, Dhanbad, Dhar, Dharmapuri, Dharwad, Dhemaji, Dhenkanal, Dholpur, Dhubri, Dhule, Dibang Valley, Dibrugarh, Dima Hasao, Dimapur, Dindigul, Dindori, Diu, Doda, Dumka, Dungapur, Durg, East Champaran, East Delhi, East Garo Hills, East Khasi Hills, East Siang, East Sikkim, East Singhbhum, Eluru, Ernakulam, Erode, Etah, Etawah, Faizabad, Faridabad, Faridkot, Farrukhabad, Fatehabad, Fatehgarh Sahib, Fatehpur, Fazilka, Firozabad, Firozpur, Full LM-79 Metrics Test, Gadag, Gadchiroli, Gajapati, Ganderbal, Gandhinagar, Ganganagar, Ganjam, Garhwa, Gautam Buddh Nagar, Gaya, Ghaziabad, Ghazipur, Giridih, Goalpara, Godda, Golaghat, Gonda, Gondia, Gopalganj, Gorakhpur, Gulbarga, Gumla, Guna, Guntur, Gurdaspur, Gurgaon, Gwalior, Hailakandi, Hamirpur, Hanumangarh, Harda, Hardoi, Haridwar, Hassan, Haveri district, Hazaribag, Here makes one general introduction to three important electrical and photometric measurements of SSL products, Hingoli, Hissar, Hooghly, Hoshangabad, Hoshiarpur, How to do LM-79 Testing?, Howrah, Hyderabad, Idukki, ies lm-79, IES LM-79-08 TEST REPORT, IES LM79 test report, IESNA standards on LED and SSL: LM-79, Imphal East, Imphal West, including LM-79, independently test our led products to LM79 standard, Indore, IP Testing Lab, ITCIndia providing Lm-79 Testing Service in all over India like Adilabad, Jabalpur, Jagatsinghpur, Jaintia Hills, Jaipur, Jaisalmer, Jajpur, Jalandhar, Jalaun, Jalgaon, Jalna, Jalore, Jalpaiguri, Jammu, Jamnagar, Jamtara, Jamui, Janjgir-Champa, Jashpur, Jaunpur district, Jehanabad, Jhabua, Jhajjar, Jhalawar, Jhansi, Jharsuguda, Jhunjhunu, Jind, Jodhpur, Jorhat, Junagadh, Jyotiba Phule Nagar, Kabirdham (formerly Kawardha), Kadapa, Kaimur, Kaithal, Kakinada, Kalahandi, Kamrup, Kamrup Metropolitan, Kanchipuram, Kandhamal, Kangra, Kanker, Kannauj, Kannur, Kanpur, Kanshi Ram Nagar, Kanyakumari, Kapurthala, Karaikal, Karauli, Karbi Anglong, Kargil, Karimganj, Karimnagar, Karnal, Karur, Kasaragod, Kathua, Katihar, Katni, Kaushambi, Kendrapara, Kendujhar (Keonjhar), Khagaria, Khammam, Khandwa (East Nimar), Khargone (West Nimar), Kheda, Khordha, Khowai, Khunti, Kinnaur, Kishanganj, Kishtwar, Kodagu, Koderma, Kohima, Kokrajhar, Kolar, Kolasib, Kolhapur, Kolkata, Kollam, Koppal, Koraput, Korba, Koriya, Kota, Kottayam, Kozhikode, Krishna, Kulgam, Kullu, Kupwara, Kurnool, Kurukshetra, Kurung Kumey, Kushinagar, Kutch, Lahaul and Spiti, Lakhimpur, Lakhimpur Kheri, Lakhisarai, Lalitpur, Latehar, Latur, Lawngtlai, LED, LED Floodlight LM-79 Report, LED Light Bulbs: Part 11: LED Testing Reports - LM-80, LED Luminaire Testing to Include LM-79 Photometric, LED Luminaires Testing Services, LED Test & Measurement, led testing standards, LED Tests: LM-79, LED/SSL Luminaires Testing, Leh, Lm 79, lm 79 certificate, LM 79 Test Laboratory - LED/SSL Luminaires‎, LM 79 Test Laboratory for Solar LED Street Light, LM 79 testing for LED product, LM-79 LM-80 Technical Report, LM-79 Luminaire Testing, LM-79 Performance Testing of Lamps, LM-79 Technical Report, LM-79 Test Requirements & Procedure, LM-79 Testing for LED DownLight | LED Down Light Testing | LM 79 testing labs in India, LM-79 testing on High Power LED Light Model, LM-79 Testing Report for LED lights, LM-79 Testing Service in India, LM-79 Testing | LM-79 Test Approved Methods, LM-79-08: Electrical and Photometric Measurements, LM-79: The Basic Facts of LED-based SSL products, LM79 Test Report, Lohardaga, Lohit, Lower Dibang Valley, Lower Subansiri, Lucknow, Ludhiana, Lunglei, M-79 test reports and luminaire LED quality and performance India Mumbai Ahmedabad New Delhi, Madhepura, Madhubani, Madurai, Mahamaya Nagar, Maharajganj, Mahasamund, Mahbubnagar, Mahe, Mahendragarh, Mahoba, Mainpuri, Malappuram, Maldah, Malkangiri, Mamit, Mandi, Mandla, Mandsaur, Mandya, Mansa, Marigaon, Mathura, Mau, Mayurbhanj, Medak, Meerut, Mehsana, Mewat, Mirzapur, Moga, Mokokchung, Mon, Moradabad, Morena, Mumbai City, Mumbai suburban, Munger, Murshidabad, Muzaffarnagar, Muzaffarpur, Mysore, Nabarangpur, Nadia, Nagaon, Nagapattinam, Nagaur, Nagpur, Nainital, Nalanda, Nalbari, Nalgonda, Namakkal, Nanded, Nandurbar, Narayanpur, Narmada, Narsinghpur, Nashik, Navsari, Nawada, Nawanshahr, Nayagarh, Neemuch, Nellore, New Delhi, Nilgiris, Nizamabad, North 24 Parganas, North Delhi, North East Delhi, North Goa, North Sikkim, North Tripura, North West Delhi, Nuapada, Ongole, Osmanabad, Pakur, Palakkad, Palamu, Pali, Palwal, Panchkula, Panchmahal, Panchsheel Nagar district (Hapur), Panipat, Panna, Papum Pare, Parbhani, Paschim Medinipur, Patan, Pathanamthitta, Pathankot, Patiala, Patna, Pauri Garhwal, Perambalur, Phek, Pilibhit, Pithoragarh, Pondicherry, Poonch, Popular Search About LM-79 Testing, Porbandar, Pratapgarh, Pudukkottai, Pulwama, Pune, Purba Medinipur, Puri, Purnia, Purulia, Raebareli, Raichur, Raigad, Raigarh, Raipur, Raisen, Rajauri, Rajgarh, Rajkot, Rajnandgaon, Rajsamand, Ramabai Nagar (Kanpur Dehat), Ramanagara, Ramanathapuram, Ramban, Ramgarh, Rampur, Ranchi, Ratlam, Ratnagiri, Rayagada, Reasi, Rewa, Rewari, Ri Bhoi, Rohtak, Rohtas, Rudraprayag, Rupnagar, Sabarkantha, Sagar, Saharanpur, Saharsa, Sahibganj, Saiha, Salem, Samastipur, Samba, Sambalpur, Sangli, Sangrur, Sant Kabir Nagar, Sant Ravidas Nagar, Saran, Satara, Satna, Sawai Madhopur, Search Results LM-79 Sample Test Reports, Searches related to Lm-79 Testing for Solar Street Light, Sehore, Senapati, Seoni, Seraikela Kharsawan, Serchhip, Shahdol, Shahjahanpur, Shajapur, Shamli, Sheikhpura, Sheohar, Sheopur, Shimla, Shimoga, Shivpuri, Shopian, Shravasti, Sibsagar, Siddharthnagar, Sidhi, Sikar, Simdega, Sindhudurg, Singrauli, Sirmaur, Sirohi, Sirsa, Sitamarhi, Sitapur, Sivaganga, Siwan, Solan, Solapur, Solar LED Street Light LM 79 Test Report LED Lights Ahmedabad, Solar LED Street Light LM 79 Test Report LED Lights India, Solar LED Street Light LM 79 Test Report LED Lights Mumbai, Solar LED Street Light LM 79 Test Report LED Lights New Delhi, Solar Wind Led Street Light Lm 79 Test Report, Sonbhadra, Sonipat, Sonitpur, Sorting out LM 79, South 24 Parganas, South Delhi, South Garo Hills, South Goa, South Sikkim, South Tripura, South West Delhi, Sri Muktsar Sahib, Srikakulam, Srinagar, Subarnapur (Sonepur), Sultanpur, Sundergarh, Supaul, Surat, Surendranagar, Surguja, Tamenglong, Tarn Taran, Tawang, Tehri Garhwal, Test report of IES LM-79-08 Approve, Test report of. IES LM-79-08. Approved Method: Electrical and Photometric. Measurements of Solid-State Lighting Products., tested according to the IES LM-79-2008, Thane, Thanjavur, The Dangs, Theni, Thiruvananthapuram, Thoothukudi, Thoubal, Thrissur, Tikamgarh, Tinsukia, Tirap, Tiruchirappalli, Tirunelveli, Tirupur, Tiruvallur, Tiruvannamalai, Tiruvarur, Tonk, Tuensang, Tumkur, Udaipur, Udalguri, Udham Singh Nagar, Udhampur, Udupi, Ujjain, Ukhrul, Umaria, Una, Understanding IES LM-79, Unnao, Upper Siang, Upper Subansiri, Uttar Dinajpur, Uttara Kannada, Uttarkashi, Uunderstanding Photometric Reports for SSL Products, Vadodara, Vaishali, Valsad, Varanasi, Vellore, Vidisha, Viluppuram, Virudhunagar, Visakhapatnam, Vizianagaram, Vyara, Warangal, Wardha, Washim, Wayanad, West Champaran, West Delhi, West Garo Hills, West Kameng, West Khasi Hills, West Siang, West Sikkim, West Singhbhum, West Tripura, Wokha, Yadgir, Yamuna Nagar, Yanam, Yavatmal, Zunheboto.

LM-79 Testing Service in India

Posted on December 16, 2015 Updated on June 30, 2017

Find LM-79 Testing Service in Your Area

ITCIndia specializes in the measurement of Solid State Lighting per IES standards including NABL accredited LM-79 luminaire testing. ITCIndia laboratory is NABL Approved LM-79 Luminaire Testing, LM-79 Luminaire Testing for ENERGY STAR® for SSL, and is accredited to provide test and measurement under ISO 17025.

ITC India NABL approved Testing Laboratory (with Certificate No. T 1811 attached herewith) with specialization to test against EN and IEC standards for electrical safety leading to CE/NIST/IEC certification. Our Lab is fully equipped with high accuracy measuring testing Instruments and trained personal to provide testing & certification services for different type of products according to IEC Standards. Some of which are IEC 60335–1, IEC 60601, IEC 61010, IEC 60204, IEC 60598, IEC 60950, IEC 61427, BS EN 50262, etc…..

The laboratory is following the procedure as required by International Standard IEC/ISO 17025 and is already certified for IEC/ISO 17025 by NABL.ITC INDIA performing ELECTRICAL SAFETY TESTING for the following:
EMC/EMI Testing Machinery Testing Luminaries and Lightning Testing Electro Medical Equipments Testing Laboratory Equipment Testing Household Appliances Testing IT and Telecom Equipment Testing Environmental Testing Battery Testing. LM 79

ITCIndia’s LM-79 luminaire and lamp testing fully evaluates the assembled luminaire for total flux, electrical power, efficacy (lm/watt), chromaticity, and angular distribution of light.

ITCIndia provides LM-79 luminaire and lamp testing reports for:

ENERGY STAR®
LED Lighting Facts
DesignLight Consortium

The standard LM-79 luminaire test report includes:

Luminaire Efficacy
Zonal Lumen Density
Visible spectral power distribution
CRI
CCT
CQS
Chromaticity coordinates
Color over angle
Various electrical measurements
IES file
Equipment

ITCIndia testing facilities are equipped with multiple type-c moving mirror color goniophotometers and integrating spheres up to 3 meters in diameter – ideal for testing large troffers and LED street lights.

ITCIndia laboratory features both a Type A and Type C Goniometer for testing a wide variety of luminaires.

What is LM-79 Luminaire Testing?

LM-79 Luminaire Testing

LM-79-08. It is the Illuminating Engineering Society of North America (IESNA) approved method for the Electrical and Photometric Measurements of Solid-State Lighting. It measures an LED luminaire or integral lamp as a whole system according to a standard process using specified equipment.

IES LM-79 Electrical and Photometric Measurements of Solid-State Lighting Products

Approved method describing procedures and precautions in performing reproducible measurements of LED Lights:

Total luminous flux
Electrical powers
Luminous Intensity distribution
Efficacy (lm/watt)
Chromaticity

LM-79 Luminaire Testing Scope:

Applies to LED-based products incorporating control electronics and heat sinks, that is, those devices that require only AC mains power or a DC voltage power supply to operate.

Absolute Photometry Basis:

LM-79 requires complete luminaire testing
Traditionally, photometric evaluation of lighting products is based on separate tests for lamps and luminaires (Relative)
For SSL products, LED lamps typically cannot be separated from their luminaire because of heat effects (Absolute)

Relative vs. Absolute Photometry:

Relative testing – Lamps of interest and luminaire (with reference lamp) are measured separately. Then the actual light distribution and intensity of the complete luminaire of interest is derived by normalization of the test data
Absolute testing – The actual light distribution and intensity of the luminaire of interest is measured directly from the complete luminaire.

Kindly send us the following Details, So that we can provide you quotation for the same:

Product Name, Technical Specifications and Brochure
Product Images
Total Number of samples Required: 2

Need guidance? Our LED Luminaire Testing FAQ will help!

Information about Federal and State LED Lighting Programs and Resources.

Call us at 8196980555 or email [email protected] for price information or an immediate quote today.

Submit Your Testing Requirements,Please fill out the Enquiry below:

This entry was posted in LM 79 Testing and tagged 79 lighting, absolute photometry, and lm, ansi 79, approved laboratories, approved testing lab, approved testing laboratories, bay area compliance labs, bay area compliance labs corp, case 21 testing, CCT and power factor . Contact us Now, chroma 61603, CRI, define ies, dl 79, download lm, elec-tech international, elec-tech international co. ltd, engineering lighting products, epa recognized laboratories, everfine china, facts about labs, Find LM-79 Testing, flux lm, goniophotometer vs integrating sphere, How Do I Get Lm-79 Testing Service?, How much does it cost to test LED?, How to improve my LED Light?, how to measure led light output, how to test a led, how to test a led light, how to test an led, How to Test LED, how to test leds, how to test lumen output, I am looking for LM-79 Testing Laboratory?, ies certification, ies electric, ies electrical, ies electrical engineering, ies for electrical engineering, ies led, ies led lighting, ies lighting, ies lm-79, ies lm-79-08, ies lm-79-08 free download, ies lm-79-08 pdf, ies lm-84, ies lm79, ies lms, ies meaning, ies na, ies pdf, ies photometric, ies photometric lights free download, ies report, ies report sample, ies stand for, ies standards, ies standards for lighting, ies status, ies test, ies testing, ies tm, ies tm-15-11, ies tm-21, ies tm-21-11, ies tm-21-11 pdf, ies tm21, ies-lm, ies規格, iesna, iesna guidelines, iesna lighting, iesna lm-63, iesna lm-79, iesna lm-79-08, iesna lm-79-2008, iesna pdf, iesna photometric file, iesna standards, iesna tm-21, iesna tm-21-11, illuminating engineering society, illuminating engineering society of north america, illuminating engineering society of north america iesna, illumination testing procedure, illumination with solid state lighting, illumination with solid state lighting pdf, ist lighting, istmt, itl boulder, l & m electric, l & m electrical, l & m engineering, l & m engineering ltd, l & m lighting, l & m performance, l & m products, l m lights, l m produce, l&m electrical, l&m green, l&m hours, l&m performance, l70 led, lab facts, laboratory light, laboratory lighting, laboratory lighting standards, laboratory lights, lcp test, lcptest, led ies, led l70, led lab, led labs, led light certification, led light tester, led light testing, led light testing equipment, led light testing procedure, led lm, led lm rating, led lumen maintenance, led standard, led standards, LED Test & Measurement, led test case, led test equipment, led test light, led test report, led testi, led testing, led testing equipment, led testing lab, led testing procedures, led testing standards, LED/SSL Luminaires. NABL Accredited Laboratory, LID, light lab international, light laboratory, light labs, light lm, light testing, light testing laboratory, lighting lab, lighting laboratory, lighting labs, lighting sciences, lighting test, lighting testing, lighting testing laboratories, list of accredited testing laboratories, lm 2008, Lm 79, lm 79 report, lm 79 test, LM 79 Test Laboratory - Over 10 years of experience, LM 79 Testing, LM 79 testing by NABL - Accredited lab in just 5 days, lm 79 testing lab near me, lm 80 report, lm certificate, lm china, lm color, lm definition, lm download, lm engineering, lm facts, lm labs, lm led, lm light, lm lighting, lm lumen, lm lumens, lm maintenance, lm measurement, lm method, lm n, lm o, lm pdf, lm report, lm reports, lm stand for, lm star, lm test, lm time, lm tm, lm-79 led, LM-79 Luminaire & Lamp Testing Laboratory, LM-79 Luminaire Testing, lm-79 standard, lm-79 standard pdf, LM-79 Test Report, LM-79 Testing (LEDs), Lm-79 testing India, lm-79 testing lab, LM-79 Testing Laboratory, LM-79 Testing Service in India, LM-79 Testing | ITCndia, lm-79-08, lm-79-08 pdf, lm-79-08 standard, lm70 led, lm79, lm79 certification, lm79 led, lm79 lm80, lm79 report, lm79 test, LM79 Testing, lm79-08, lm7908, lumen diagram, lumen lm, lumen maintenance, lumen maintenance definition, lumen method example, lumen test, lumen tester, Lumens, lumens lm, luminaire spacing criteria, luminaire testing, luminaire testing lab, luminaire testing laboratory, luminairs, luminous intensity diagram, luminous intensity distribution diagram, lux tsi, meaning of ies, near me LM-79 Testing Lab, o lm, One of the Best Lm-79 Test Laboratory in India, orb optronix, per lm, philip lm, philips led certification, philips report, photometric ies, photometric ies files free download, photometric ies lights free download, photometric light ies, photometric lumens, photometric measurements, photometric report, photometric test, Photometric Testing, photometric testing laboratory, photometry test, polar intensity diagram, relative photometry, report tm, solid measurements, solid state lighting, Solutions for LM-79‎ India, ssl lab test, ssl test lab, standard led, standard led lighting, standard tm, star lm, test ies, test leds, test lighting, test lm, test tm, test-79, teste lm, testing an led, testing led, testing led lights, Testing LEDs, testing of led, the light lab, tm 21, tm 21 led testing, tm 79, tm led, tm lighting, tm lm, tm report, tm test, tm-21 led, tm-21 standard, tm-21-11, tm21 led, tm21 report, ul 79, Understanding LM-79 Reports, understanding photometric data, what does ies stand for, what does l&m stand for, what does lm, what does lm mean, what does lm mean in lighting, what does lm mean in measurements, what ies, what is 79, what is a 79, what is a lm, what is an lm, what is ies, what is iesna, what is lm in lighting, what is lm-79, what is lm79, what is meant by ies, What is the cost for LM-79 test?, What is the Cost of LM-79 testing in India?, what is the meaning of ies, what is the meaning of lm, Where can I find Lm-79 Test Lab?, Where is LM-79 Testing Lab?, Who is doing LM-79 Testing?, Who is LM-79 Testing Expert?, Who is the CEO of ITCIndia?, Who’s actually doing LM-79 Testing, zonal lumens.

Testing Lab For LED display, panel, screen, module lights

Posted on September 1, 2015 Updated on May 19, 2016

ITC INDIA Provide Testing Service on LED display, LED panel, LED screen, LED module.

If you have any query regarding Household and Similar Electrical Appliances testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.

We are waiting for your earliest reply.You can call or write us for any clarification

Puneet Sharma | +91.8196980555 | [email protected] | ITC India Pvt. Ltd

Submit Your Testing Requirements,Please fill out the Enquiry below:

This entry was posted in LED Testing and tagged 2D, A New Top LED Panel for Testing, Display Test & LED Testing, How to Test LED, How to Test LED Backlight, How to Test LED Lights, How To test LED Screen, How to test seven segment display, LCD monitor test, LED display Testing, LED Electrical Test Module, LED LCD Panel Screen Testing, LED MODULE BENCH TEST, LED module Testing, LED Panel test, LED panel Testing, LED screen Testing, LED Test & Measurement, LED Test Solutions, LED testing and LED test services for light measurement, LED Testing | LED Lighting | Tubes, LED/Lighting & Driver Test Solution, Panels, Searches related to LED panel Testing, Spotlights, Testing LEDs, Testing On LED display, Testing On LED module., Testing On LED panel, Testing On LED screen.

LED Testing

Posted on August 19, 2015 Updated on May 19, 2016

LED-lamps, LED bulb, LED based street lights, Flood lights, Tube lights, DC or AC supplied electronic control gear for LED modules, indoor-outdoor LED luminaries etc. Popular standards for LED product testing are LM 79, IS 16106 : 2012, IEC 61347 – 2 – 13, IEC 62384, IEC 62722-2-1, IEC 62031, IS 15885 (part 2 / sec 13), IS 16103, IS 16102, IEC 62612, IEC 60969 etc.

If you have any query regarding earth leakage current testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.

We are waiting for your earliest reply.

You can call or write us for any clarification.

Thanks & Regards,
Puneet Sharma
M: +91.8196980555
E-mail:-([email protected])
ITC India Pvt. Ltd

Submit Your Testing Requirements,Please fill out the Enquiry below:

This entry was posted in LED Testing and tagged Easy Way To Test LED's, How to Test LED Lights, led safety testing, LED Test & Measurement, LED Test Solutions, LED Testing Ahmedabad, LED Testing Ambala, LED testing and LED test services for light measurement, LED Testing Banglore, LED Testing Chennai, led testing circuit, LED Testing Delhi, led testing equipment, led testing instruments, led testing lab, LED Testing laboratory Ahmedabad, LED Testing laboratory Chennai, LED Testing laboratory Delhi, LED Testing Laboratory India, LED Testing laboratory Mumbai, LED Testing laboratory Panchkula, LED Testing laboratory Pune, LED Testing Ludhiana, LED Testing Mumbai, LED Testing panchkula, LED Testing Pune, led testing standards, led testing using multimeter, led testing with multimeter, Searches related to LED Testing, Testing LEDs.

Electrical Safety Testing Lab

ITCIndia Electrical Safety Testing Laboratory provide LED Light, Photometric LM 79, IP dust & water ingress protection, Machinery Safety, Testing.

LED Test & Measurement

LED Test & Measurement

Thermal Testing for LED Lights, Thermal Testing of LEDs, Thermal testing of road luminaires

Temperature Measurement Data as per client specification

If you’re Buyers Demanding for Thermal Testing– Contact Now

Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations, Fill the Enquiry form:

How LM-79 testing can help assess LED luminary quality and performance?

If you’re Buyers Demanding for LED Luminaries Lamps Testing– Contact Now!

Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations, Fill the Enquiry form:

LED Lighting Testing Laboratory

Top Searches related to LED Light Testing

If you’re Buyers Demanding for LED Testing– Contact Now!

ITC India has around 5000 clients from LED lighting division from All over India.

If you are interested to Get LED Test Report, You can Please feel free to Ask for Quotation.

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations, Fill the Enquiry form:

Lm-79 Testing Laboratory for LED Solar Lights in India

Testing parameter under LM 79 testing for LED Solar Lights:

The Testing to be conducted is as follows:-

If you want details and quotations for Lm-79 Testing, Kindly send us the following details:

Popular Search about LM-79 Testing:-

If you’re Buyers Demanding for LM-79 Testing Services – Contact Now!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations to fill out the Enquiry form below:

Find LM-79 Testing Service in Your Area

ITCIndia provides LM-79 luminaire and lamp testing reports for:

The standard LM-79 luminaire test report includes:

IES LM-79 Electrical and Photometric Measurements of Solid-State Lighting Products

LM-79 Luminaire Testing Scope:

Absolute Photometry Basis:

Relative vs. Absolute Photometry:

Kindly send us the following Details, So that we can provide you quotation for the same:

Trending Searches related LM-79 Testing: