Testing LEDs

LED Lights Testing

Posted on Updated on

LED Lights Testing
LED Lights Testing

LED Lighting Testing Laboratory

If you are looking for LED Testing for LED Lights, ITC India Can Help You! ITC India NABL Accredited Laboratory one of the best LED Light Testing Service Provider in India, ITC India Can Do Endurance & Temperature Testing, IP 65 Testing, IP 66 Testing, IP 67 Testing, IS 15885 (P2/S13) Testing, IS 16104 Testing, LM 79/IS 16106 Testing Luminaire Testing, and etc..

ITCIndia discipline of Electrical (T-1811), Electronics (T-3509) and photometry (T-3510), serving its satisfied customers for last 5 years. Laboratory is fully equipped with the highly accurate Machines to test Endurance & Temperature Testing, IP 65 Testing, IP 66 Testing, IP 67 Testing, IS 15885 (P2/S13) Testing, IS 16104 Testing, LM 79/IS 16106 Testing, Luminaire Testing and etc. It owns Integrating sphere as well as Goniophotometer.

The Testing to be conducted is as follows:-

S.NO. PRODUCT Testing as per standard No of Samples
1. LED Light Endurance and Temperature Testing 01
IP 65 02
IP 66 02
IP 67 02
IS 15885 (P2/S13) 17
IS 16104 02
Testing to be conducted under LM 79/IS 16106

a.      Measurement of Total Luminous Flux & Luminous Efficacy

b.      b. Color Characteristics (Chromaticity Coordinates, Correlated Color Temperature & Color Rendering Index)

 

01
c. Light Intensity Distribution Testing

 

01

Note:   

  1. 1. Service Tax @ 15% will be applicable & charged over and above the Testing Fees.
  2. LM 79 Test Report will be on basis of 30 Minutes to 2 Hrs Stabilization Time depending upon the size of the Luminaire.
  3. Test Report of LM 79 with NABL Logo can only be issued for LED Lamps & Tube Lights only,

Top Searches related to LED Light Testing

If you’re Buyers Demanding for LED Testing– Contact Now!

ITC India has around 5000 clients from LED lighting division from All over India.

If you are interested to Get LED Test Report, You can Please feel free to Ask for Quotation.

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations, Fill the Enquiry form:

LM-79 Testing Service in India

Posted on Updated on

Find LM-79 Testing Service in Your Area

ITCIndia specializes in the measurement of Solid State Lighting per IES standards including NABL accredited LM-79 luminaire testing. ITCIndia laboratory is NABL Approved LM-79 Luminaire Testing, LM-79 Luminaire Testing for ENERGY STAR® for SSL, and is accredited to provide test and measurement under ISO 17025.

ITC India  NABL approved Testing Laboratory (with Certificate No. T 1811 attached herewith) with specialization to test against EN and IEC standards for electrical safety leading to CE/NIST/IEC certification. Our Lab is fully equipped with high accuracy measuring testing Instruments and trained personal to provide testing & certification services for different type of products according to IEC Standards. Some of which are IEC 60335–1, IEC 60601, IEC 61010, IEC 60204, IEC 60598, IEC 60950, IEC 61427, BS EN 50262, etc…..

The laboratory is following the procedure as required by International Standard IEC/ISO 17025 and is already certified for IEC/ISO 17025 by NABL.ITC INDIA performing ELECTRICAL SAFETY TESTING for the following:
EMC/EMI Testing Machinery Testing Luminaries and Lightning Testing Electro Medical Equipments Testing Laboratory Equipment Testing Household Appliances Testing IT and Telecom Equipment Testing Environmental Testing Battery Testing. LM 79

ITCIndia’s LM-79 luminaire and lamp testing fully evaluates the assembled luminaire for total flux, electrical power, efficacy (lm/watt), chromaticity, and angular distribution of light.

ITCIndia provides LM-79 luminaire and lamp testing reports for:

  1. ENERGY STAR®
  2. LED Lighting Facts
  3. DesignLight Consortium

The standard LM-79 luminaire test report includes:

  1. Luminaire Efficacy
  2. Zonal Lumen Density
  3. Visible spectral power distribution
  4. CRI
  5. CCT
  6. CQS
  7. Chromaticity coordinates
  8. Color over angle
  9. Various electrical measurements
  10. IES file
  11. Equipment

ITCIndia testing facilities are equipped with multiple type-c moving mirror color goniophotometers and integrating spheres up to 3 meters in diameter – ideal for testing large troffers and LED street lights.

ITCIndia laboratory features both a Type A and Type C Goniometer for testing a wide variety of luminaires.

What is LM-79 Luminaire Testing?

LM-79 Luminaire Testing

LM-79-08. It is the Illuminating Engineering Society of North America (IESNA) approved method for the Electrical and Photometric Measurements of Solid-State Lighting. It measures an LED luminaire or integral lamp as a whole system according to a standard process using specified equipment.

IES LM-79 Electrical and Photometric Measurements of Solid-State Lighting Products

Approved method describing procedures and precautions in performing reproducible measurements of LED Lights:

  1. Total luminous flux
  2. Electrical powers
  3. Luminous Intensity distribution
  4. Efficacy (lm/watt)
  5. Chromaticity

LM-79 Luminaire Testing Scope:

Applies to LED-based products incorporating control electronics and heat sinks, that is, those devices that require only AC mains power or a DC voltage power supply to operate.

Absolute Photometry Basis:

  1. LM-79 requires complete luminaire testing
  2. Traditionally, photometric evaluation of lighting products is based on separate tests for lamps and luminaires (Relative)
  3. For SSL products, LED lamps typically cannot be separated from their luminaire because of heat effects (Absolute)

Relative vs. Absolute Photometry:

  1. Relative testing – Lamps of interest and luminaire (with reference lamp) are measured separately. Then the actual light distribution and intensity of the complete luminaire of interest is derived by normalization of the test data
  2. Absolute testing – The actual light distribution and intensity of the luminaire of interest is measured directly from the complete luminaire.

Kindly send us the following Details, So that we can provide you quotation for the same:

  1. Product Name, Technical Specifications and Brochure
  2. Product Images
  3. Total Number of samples Required: 2

Need guidance? Our LED Luminaire Testing FAQ will help!

Information about Federal and State LED Lighting Programs and Resources.

Call us at 8196980555 or email [email protected] for price information or an immediate quote today.

Trending Searches related LM-79 Testing:

How to improve my LED Light?, Who is the CEO of ITCIndia?, Who’s actually doing LM-79 Testing, Who is doing LM-79 Testing?, What is the Cost of LM-79 testing in India?, Who is LM-79 Testing Expert?, What is the cost for LM-79 test?, How much does it cost to test LED?, Where can I find Lm-79 Test Lab?, Where is LM-79 Testing Lab?, How Do I Get Lm-79 Testing Service?, I am looking for LM-79 Testing Laboratory?, One of the Best Lm-79 Test Laboratory in India, near me LM-79 Testing Lab, LM-79 Testing Lab near me, LM-79 Luminaire & Lamp Testing Laboratory, LM-79 Testing (LEDs), Understanding LM-79 Reports, LM 79 testing by NABL – Accredited lab in just 5 days, LM 79 Test Laboratory – Over 10 years of experience, LED/SSL Luminaires. NABL Accredited Laboratory, LID, Lumens, CRI, CCT and power factor . Contact us Now, LED Test & Measurement, LM-79 Luminaire Testing

 

If you have any query regarding LM 79 Testing, Kindly send us your testing requirements with the product technical details to submit you our testing charges.

We are waiting for your earliest reply. You can call or write us for any clarification

Puneet Sharma | +91.8196980555 | [email protected] | ITC India Pvt. Ltd

Submit Your Testing Requirements,Please fill out the Enquiry below:

Testing Lab For LED display, panel, screen, module lights

Posted on Updated on

ITC INDIA Provide Testing Service on LED display, LED panel, LED screen, LED module.

If you have any query regarding Household and Similar Electrical Appliances testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.

We are waiting for your earliest reply.You can call or write us for any clarification

Puneet Sharma | +91.8196980555 | [email protected] | ITC India Pvt. Ltd

Submit Your Testing Requirements,Please fill out the Enquiry below:

LED Testing

Posted on Updated on

LED-lamps, LED bulb, LED based street lights, Flood lights, Tube lights, DC or AC supplied electronic control gear for LED modules, indoor-outdoor LED luminaries etc. Popular standards for LED product testing are LM 79, IS 16106 : 2012, IEC 61347 – 2 – 13, IEC 62384, IEC 62722-2-1, IEC 62031, IS 15885 (part 2 / sec 13), IS 16103, IS 16102, IEC 62612, IEC 60969 etc.

 

If you have any query regarding earth leakage current testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.

We are waiting for your earliest reply.

You can call or write us for any clarification.

Thanks & Regards,
Puneet Sharma
M: +91.8196980555
E-mail:-([email protected])
ITC India Pvt. Ltd

Submit Your Testing Requirements,Please fill out the Enquiry below: