LED Testing

LM 79 Testing lab in India | laboratory For LED Testing ITCIndia

Posted on Updated on

LM 79 Testing at ITC India Pvt Ltd | LM 79 Testing laboratory in India

If you are looking for LM-79 Testing Laboratory in India, ITCIndia Can Do. ITC India NABL Accredited Electrical Safety testing Laboratory Providing LM-79 Testing.

ITC India have NABL accreditation Testing laboratory under ELECTRICAL , ELECTRONICS and  PHOTOMETRY testing with certificate no. T-3509 , T-3570 & T-1811. ITC India Testing Laboratory is fully equipped with high accuracy Measuring Instruments and  trained personal to provide testing and certification Services for Electrical and  Electronic equipments. ITC India Laboratory is following the procedure as required by International Standard IEC 17025 and is already certified for ISO/IEC 17025. ITC India offering this LM 79 testing services in all over India like , Mumbai , Chennai ,Ahmedabad , New Delhi, Pune, Banglore, Kolkata

ITC India Pvt Ltd. has recently installed the  Goniophotometers LED/SSL at its Mohali laboratory. This is in addition to integrated sphere in the field of photometry testing of lamps & luminaires. With this additional testing facility, ITC India is able to perform complete photometry testing on all kinds of lamps and luminaires including LED lamps, LED Street Light, LED Downlights, outdoor lighting, LED floodlight, LED Tube lights, LED spotlight , led light strips,  led light bars, led light fixtures, and luminaires.

ITC India Laboratory  is totally equipped with high accuracy testing instruments  like spectrometer , integrating sphere , Goniophotometer , power meter , LED driver tester , safety tester , environmental chamber , and many more to provide a total testing solution for LED based product

IES LM-79-08 standard

Approved Method: Electrical and photometric Measurements of Solid-state Lighting Product

Photometric Results

Colorimetric Parameters:

  1. Chromaticity coordinates: (Chroma x / Chroma y / Chroma u(u’) / Chroma v / Chroma v’)
  2. Correlated Color Temperature (CCT)
  3. Duv Value
  4. Color Ratio
  5. Peak Wavelength (nm)
  6. Half Bandwidth (nm)
  7. Dominant Wavelength (nm)
  8. Color Purity
  9. Color Rendering Index (CRI – Ra)

Photometric Parameters:

  1. Total Luminous Flux (Lumens)
  2. Luminous Efficacy (Lumens/Watt)
  3. Radiant Power (Watts)

Electrical Results:

  1. Input Power (Watts)
  2. Input Voltage (Volts )
  3. Input Current (Amps)
  4. Power Factor
  5. Input Frequency (Hz)

Additional Parameters:

  1. Stabilization Time (Light and Power) = 60 minutes
  2. Test Geometry Configuration = 4π
  3. Spectroradiometer = (Lisun LMS-9000A Plus)
  4. Ambient Temperature = 25.0°C

ITC India Lab can do the testing of your LED product against the different standard like LM 79, IS 16106, IEC 60598-1, IEC 61347-2-13, IEC 62384, IEC62722-2-1, IEC 62031, IS 15885(part2/sec13), IS 16103, IS 16102, IEC 62612, and IEC 60969 etc  

LM 79 Testing for Solid State lighting; It includes below parameters like total lumens , CCT , CRI , Lm/watt , Luminous intensity distribution & electrical parameter like voltage , current , power & power factor ….

Popular Search about LM-79 Testing:-

  1. How to do LM-79 Testing?
  2. LM-79 Testing | LM-79 Test Approved Methods
  3. LM-79 Testing Report for LED lights, LM-79 Test Requirements & Procedure, lm 79 certificate
  4. LM-79 Testing for LED DownLight | LED Down Light Testing | LM 79 testing labs in India
  5. LED Luminaires Testing Services
  6. LM 79 testing for LED product
  7. LM-79 Testing Service in India

ITC India have around 5000 clients from LED lighting division from All over India. if you are interested to Get LM 79 Test Report.If you’re Buyers Demanding for LM-79 Testing – Contact Now!

Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]

Get Instant Quotations to fill out the Enquiry form below:

ILm 79 testing lab in India, Lm 79 Testing lab in India, LM-79 Testing labs in india, Searches related to Lm 79 testing lab in India, led testing labs in india, lm 79 testing labs in bangalore, lm 79 testing labs in india, led testing lab in india, lm 79 test report, lm-79 test procedure, ITC India test house, NABL, Searches related to Lm 79 Testing lab in India, led testing labs in india, lm 79 testing labs in bangalore India, lm 79 test report Itcindia, led testing laboratory in india, lm-79 test procedure in India, ITCindia test house, NABL approved lab, Searches related to LM-79 testing labs in india, ITC India led testing labs in india, lm 79 testing labs in bangalore Karnataka, lm 79 testing report India, lm-79 test procedure

LED Tube Light Safety Testing as per IEC 60598-2-1 | LM-79 testing | IP Testing India

Posted on

LED Tube Light Safety Testing as per IEC 60598-2-1 | LM-79 testing | IP Testing India

Need to Get LED Tube Light Safety Testing as per IEC 60598-2-1, LM-79 testing, IP Testing in India?

ITCIndia Nabl Accredited Electrical safety Testing Laboratory Providing LED Tube Light Safety Testing and Certification Services as per IEC 60598-2-1, if you are looking for LED Tube Light Safety Testing Laboratory in your Area, you can feel free to contact us, ITCIndia also providing LM-79 testing, and IP testing for LED Tube Lights, if you are interested, we will be happy to assist you.

General Requirements for LED Tube Light Testing and Certification and Procedure:

  1. Classification for LED Tube Light Safety Testing as per IEC 60598-2-1

  • Type of protection Class 0 excluded Class II
  • Degree of protection Requirement: Ordinary IP20
  • Luminaire suitable for direct mounting on normally flammable surfaces.
  • Luminaire not suitable for direct mounting on normally flammable surfaces
  • Luminaire for normal use
  • Luminaire for rough service
  1. Marking for LED Tube Light Safety Testing as per IEC 60598-2-1:

  • Mandatory markings
  • Position of the marking
  • Format of symbols/text
  • Additional information
  • Language of instructions
  • Combination luminaires
  • Nominal frequency in Hz 50/60 Hz
  • Operating temperature
  • Symbol or warning notice
  • Wiring diagram
  • Special conditions
  • Metal halide lamp luminaire – warning
  • Limitation for semi-luminaires
  • Power factor and supply current
  • Suitability for use indoors
  • Luminaires with remote control
  • Clip-mounted luminaire – warning
  • Specifications of protective shields
  • Symbol for nature of supply
  • Rated current of socket outlet
  • Rough service luminaire
  • Mounting instruction for type Y, type Z and some Type X attachments
  • Non-ordinary luminaires with PVC cable
  • Protective conductor current in instruction if applicable
  • Provided with information if not intended to be mounted within arms reach
  • Test with water
  • Test with hexane
  • Legible after test
  • Label attached
  1. Construction
  2. Creepage distances and clearances
  3. Provision for earthing
  4. Screw terminals
  5. Screw less terminals and electrical connections
  6. External and internal wiring
  7. Protection against electric shock
  8. Endurance test and thermal test
  9. Resistance to dust, solid objects and moisture
  10. Insulation resistance and electric strength
  11. Resistance to heat, fire and tracking

And etc………

Please give us the following information to quote you:

  1. LED Tube Light photograph
  2. Intended use of the LED Tube Light
  3. Technical specification of the LED Tube Light.

We hope to have the opportunity to work with you in the future

For Further Clarification Please feel free to Contact Now! We would be happy to assist you

Mr. Puneet Sharma | Call: 08196980555 | Email: [email protected]

Get Instant Quotations for LED Tube Light Testing, Please Fill the Enquiry form below:

LED Bulb Testing

Posted on Updated on

LED Bulb Testing

ITC India NABL Accredited laboratory provide LED Bulb Testing as per following standards blow:-

  • IS 16107,
  • Instensity DIstribution Test as Per IS 16103 (Part 2),
  • Harmonic Test as Per IEC 61000-3-2,
  • IP 65 as per IS 10322,
  • IS 16102 (Part 2)

If you have any query regarding LED Bulb Testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.
We are waiting for your earliest reply. You can call or write us for any clarification
Puneet Sharma | +91.8196980555 | [email protected] | ITC India Pvt. Ltd

Submit Your Testing Requirements,Please fill out the Enquiry below:

Testing Lab For LED display, panel, screen, module lights

Posted on Updated on

ITC INDIA Provide Testing Service on LED display, LED panel, LED screen, LED module.

If you have any query regarding Household and Similar Electrical Appliances testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.

We are waiting for your earliest reply.You can call or write us for any clarification

Puneet Sharma | +91.8196980555 | [email protected] | ITC India Pvt. Ltd

Submit Your Testing Requirements,Please fill out the Enquiry below:

LED Testing

Posted on Updated on

LED-lamps, LED bulb, LED based street lights, Flood lights, Tube lights, DC or AC supplied electronic control gear for LED modules, indoor-outdoor LED luminaries etc. Popular standards for LED product testing are LM 79, IS 16106 : 2012, IEC 61347 – 2 – 13, IEC 62384, IEC 62722-2-1, IEC 62031, IS 15885 (part 2 / sec 13), IS 16103, IS 16102, IEC 62612, IEC 60969 etc.

 

If you have any query regarding earth leakage current testing and Certification. Kindly send us your testing requirements with the product technical details to submit you our testing charges.

We are waiting for your earliest reply.

You can call or write us for any clarification.

Thanks & Regards,
Puneet Sharma
M: +91.8196980555
E-mail:-([email protected])
ITC India Pvt. Ltd

Submit Your Testing Requirements,Please fill out the Enquiry below: