Kalyan & Dombivali
LM-79 Testing for LED Lights
LM-79 is an approved method for taking electrical and photometric measurements of SSL products. It covers total flux (light output), electrical power, efficacy, chromaticity, and intensity distribution. The five required metrics on the LED Lighting Facts label come from LM-79 testing results.
ITCIndia Offering you a complete choice of services which include LM 79 Testing, Safety Testing, Electrical Testing, IEC/EN/IS/BS/ISO Testing, IP testing as per IEC 60529 and Cable Gland Testing.
ITCIndia Laboratory has been awarded accreditation by the NABL under the Energy Efficient Lighting Products Program. This includes LM-79 accreditation for Solid State Lighting Luminaires – Total Flux Measurements (Luminous Efficacy) and Solid State Lighting Luminaires –Luminous Intensity Measurements.
Our accreditation also includes IES LM-80:2008 for Solid State Lighting Luminaires-Lumen Maintenance (SSL Life Tests).
ITCIndia laboratory is also on the LED Lighting Facts Approved Labs List.
ITCIndia can do safety testing against below international standard like
- IEC 61010-1 : lab instruments
- IEC 60204-1 : COntrol panel
- IEC 60595 : LED luminary
- IEC 61347 : Lamp control gear
- IEC 60950 : Information technology equipments
- IEC 60601 : Electromedical equipmets
- IEC 60065 : Audio video & similar product
- IEC 61439 : Low voltage switchgear & control gear assemblies
- IEC 60034 : rotating electrical machine and more contact us for more information…
LM-79 Definition and Scope
IES LM-79 is an approved method for testing electrical and photometric measurements of solid-state lighting products. LM-79 contains procedures for performing reproducible measurements of LEDs properties, including: total flux, electrical power, efficacy and chromaticity.
The scope of LM-79 applies to LED products that incorporate control electronics and heat sinks. This covers complete LED luminaires and integrated LED sources. It does not include bare LED chips or LED based products without a light source.
LM-79 testing requires complete luminaire testing on an absolute photometric basis. Typically lighting products are evaluated on a relative photometric basis, where separate tests are done for lamps an luminaires. However, for solid state lighting products the LED lamps typically cannot be separated from their luminaires. The absolute photometric testing required measures the light distribution and light intensity of the complete luminaire.
LM-79 Procedures and Conditions
- Ambient Conditions
- Maintain temperature at 25 degrees C +/-1 degree C (within 1M)
- Mounting – limit thermal transfer
- Limited air flow
- Power Supply
- AC waveshape limit to harmonic RMS of 3%
- Voltage regulation to +/- 2%
- Seasoning and Stabilization
- Testing Orientation
- Electrical Settings
LM-79 Testing Methods
Integrating sphere systems are used to measure the total luminous flux and color for LM-79. This can be performed with a photometer (total luminous flux) or a spectral radiometer (spectral radiant flux). Utilizing a spectral radiometer and integrating sphere is the preferred method, which derives total luminous flux and color qualities form spectral radiant flux measurements.
Goniophotometer systems are also used for LM-79 testing to measure luminous intensity distribution. The Goniophotometer system tests derive total luminous flux and provide color characteristics including CCT and CRI.
LM-79 Test Outputs and Calculations
- Total Luminous Flux
- Luminous Intensity Distribution
- Electrical Power
- Luminous Efficacy
For your better understanding, we are going to show you the LM-79 test report of latest LED in the following:
If you’re Buyers Demanding for LM-79 Testing for LED Lights– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]
Get Instant Quotations, Fill the Enquiry form:
This entry was posted in LM 79 Testing and tagged Agra, Ahmedabad, Ajmer, Aligarh, Allahabad, Ambattur, Amravati, Amritsar, Asansol, Aurangabad, Bangalore, Bareilly, Belgaum, Bhavnagar, Bhilai Nagar, Bhiwandi, Bhopal, Bhubaneswar, Bikaner, Chandigarh, Chennai, Coimbatore, Cuttack, Dehradun, Delhi, Dhanbad, Durgapur, Faridabad, Firozabad, Gaya, Ghaziabad, Gorakhpur, Gulbarga, Guntur, Gurgaon, Guwahati, Gwalior, Haora, Hubli and Dharwad, Hyderabad, IES File Generation, ies lm-80, Indore, Instrument solutions for lm-79, ISO 17025 Accredited Testing, Jabalpur, Jaipur, Jalandhar, Jalgaon, Jammu, Jamnagar, Jamshedpur, Jhansi, Jodhpur, Kalyan & Dombivali, Kanpur, Kochi, Kolapur, Kolkata, Kota, Lm 79, lm 79 80 standards, LM 79 testing by NABL - Accredited lab in just 5 days, lm 79 testing labs in india, lm-79 standard pdf, lm-79 test procedure, LM-79 Test Report, LM-79 test reports and luminaire LED quality and performanc, lm-80, Loni, Lucknow, Ludhiana, Madurai, Maheshtala, Malegoan, Mangalore, Meerut, Mira and Bhayander, Moradabad, most applied & high accuracy, Mumbai, Mysore, Nagpur, Nanded Waghala, Nashik, Navi Mumbai, Nellore, Noida, Patna, Pimpri Chinchwad, Pune, Raipur, Rajkot, Ranchi, Saharanpur, Salem, sample lm79 report, Sangli Miraj Kupwad, Searches related to What is the LM-79 Testing of LED Lights?, Siliguri, Solapur, Srinagar, Surat, Thane, Thiruvananthapuram, Tiruchirappalli, Tirunelveli, Udaipur, Ujjain, Ulhasnagar, Vadodara, Varanasi, Vasai Virar, Vijayawada, Visakhapatnam, Warangal, What is the LM-79 Testing.