Room Heater Testing
ITCIndia Can do Room Heater Testing as per IEC 60335-2-30, IS 302-2-30, ASTM E1509 Standards
If you are looking for Room Heater testing Laboratory for Room Heater In India, Mumbai, Chennai, Ahmedabad, New Delhi, Pune, Kolkata, Bangalore, Hyderabad, Surat, Visakhapatnam and other city, ITCINDIA NABL Approved Electrical Safety testing Lab Can Help You! ITC India one of the best Room Heater testing Laboratory in India.
We, “Institute of Testing and Certification India Pvt. Ltd” are a leading testing company/laboratory having a NABL accreditation under ELECTRICAL, ELECTRONICS and PHOTOMETRY testing with certificate no. T-3509, T-3570 and T-1811. The Laboratory is following the procedure as required by International Standard IEC 17025 and is already certified for ISO/IEC 17025.
Applicable Standards:
- IEC 60335-2-30
- IS 302-2-30
- ASTM E1509
Essential Tests:
- Protection against access to live parts
- Power input and output at operating temperature
- Heating
- Temperature rise
- Leakage current and electric strength
- Transient overvoltage
- Moisture resistance
- Overload protection
- Stability and mechanical hazards
- Mechanical strength
- Provision for earthing
- Insulation resistance
- Creepage and air clearance
Some important test Results are shown in tabular form
Table A:
| Cl. 10.1 | TABLE: Power input deviation | P | |||
| Input deviation of/at: | P rated  |
P measured |
Allowed Deviation | Remark | |
| 230V, 50Hz | 2000W | 1930W | +5% & -10% | Within limit | |
Table B:
| Cl. 11.8 | TABLE: Heating | P | ||
| Test voltages (V) : | At 1.15 * 2000W = 2300 W | – | ||
| Ambient (°C) : | 25°C | – | ||
| Thermocouple locations | Temp. Measured (oC) | Max. Rise Temp. (oC) | Max Limit (oC) | |
| a) Internal Wiring | 72 | 47 | 50 | |
| b) External Wiring | 64.1 | 39.1 | 50 | |
| c) Handle | 54.5 | 29.5 | 60 | |
| d) Switch | 49 | 24 | 30 | |
Table C:
| Clause. No. | Test Conducted | Test Conditions | Test requirement | Results |
|
Cl. 13.2 |
Leakage Current Test |
Motor operated appliance: 1.06 times of rated voltage: Between : Each pole of the supply source and the accessible metal part | Shall not exceed 0.75mA | Pass Imea:24µA |
|
Cl. 13.3 |
High Voltage Test | Test voltage: : 1000 V Test Duration: 1 min.
Test Part: Between live part and screw on the body. |
Shall withstand without breakdown | Pass
No flashover or break down occur |
| Cl. 14 |
Impulse Test (Transient over voltages) |
Transient Overvoltage: 2920V The impulse test voltage is applied three times for each polarity with intervals of at least 1s. | There shall be no flashover. | Pass, No flash over occur. |
|
Cl. 27.5 |
Earth Contact Resistance Test |
Test Current: 25A
Test Part: Between protective earth terminals and accessible metal Part |
Calculated Earth Contact Resistance from current & drop in voltage shall not exceed 0.1 Ω) | Pass
Rmea:-22.6mΩ |
Table D:
| Cl. 29: Clearances, creepage distances and solid insulation | |||
| Minimum distance (mm) | Measured distance (mm) | Verdict | |
| Clearances | |||
| – Basic insulation (at Rated Impulse Voltage 2500) | 1.5mm | >1.5mm | P |
| Creepage distances | |||
| – Basic Insulation (at Working voltage 250V for pollution Degree 3, Material Group IIIa/IIIb) |
4mm |
>4mm |
P |
For your better understanding, we are going to show you the Room Heater Test report of latest LED in the following:
Learn more about this Room Heater test >
If you’re Buyers Demanding for Room Heater Testing– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]
Get Instant Quotations, Fill the Enquiry form:
Photometric Testing for LED Lighting
Photometric Testing for LED Lighting Laboratory
If you are looking for Photometric Testing Laboratory for LED Lighting In India, Mumbai, Chennai, Ahmedabad, New Delhi, Pune, Kolkata, Bengaluru, Hyderabad, Surat, Visakhapatnam and other city, ITC India Can Help You! ITC India one of the best Photometric Testing Laboratory in India.
We, “Institute of Testing and Certification India Pvt. Ltd” are a leading testing company/laboratory having a NABL accreditation under ELECTRICAL , ELECTRONICS & PHOTOMETRY testing with certificate no. T-3509, T-3570 & T-1811. Testing Laboratory is fully equipped with high accuracy Measuring Instruments & trained personal to provide testing and certification Services for Electrical and Electronic equipment’s. The Laboratory is following the procedure as required by International Standard IEC 17025 and is already certified for ISO/IEC 17025.
Our lab is totally equipped with following high accuracy testing instruments to provide testing solution for LED Lights as per IES LM 79-08 standards/IS 10322/IS 16102 part 2
- High precision CCD Spectroradiometer with 2.0 MTR integrating sphere
- Type- C Moving Detector Goniophotometer as per IES LM 79-08 standard
- LED power driver tester
What should be the Content of IES LM 79-08 test report: The test report should contain below parameter:
- Total Luminous Flux
- Luminous Intensity Distribution, IES file
- Electrical Power Characteristics( voltage , current , power , PF & Hz)
- Luminous Efficacy (calculated)lm/watt
- Color Characteristics (CRI, CCT…)
Why to choose ITC India:
- Have NABL under photometry attached is the copy
- Very short turnaround time: Max 5 working days(can do in short time also)
- Have local office in Major City
- We are always customer driven
- Lowest testing rate in INDIA
For your better understanding, we are going to show you the Photometric Testing report of latest LED in the following:
Learn more about this Photometric test >
If you’re Buyers Demanding for Photometric Testing for LED Lights– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Kindly let us know if you have any present or a future requirement we would be happy to share our Services, past work details , samples test report format, client Testimonials ,formal quotation, etc.
Waiting for your earliest positive revert.
Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]
Get Instant Quotations, Fill the Enquiry form:
Medical Bed Testing
Combo therapy Medical Bed Testing
If you are looking for Medical Bed Testing Laboratory in India, ITC India Can Help You! ITC India one of the best Medical Bed Testing Service Provider in India. ITCIndia Can do Medical Bed Testing as per IEC 60601-2-52, EN 60601 Standard
Applicable Standards:
- IEC 60601-2-52
- EN 60601
Essential Tests:
- Protection against accidental contact
- Protection against Electrical Hazards
- Leakage current and patient auxiliary current
- Single fault condition
- Touch current
- Dielectric Strength Test
- Insulation Resistance
- Humidity preconditioning treatment
- Voltage drop test
- Resistance to environmental stress
- Creepage and air clearance
- Thermal Cycling
- Environmental stress resistance test
- Cord anchorage Pull Test
- Stability tests
- Protection against excessive temperatures
- Mechanical strength test
For your better understanding, we are going to show you the Medical Bed Test report
If you’re Buyers Demanding for Medical Bed Testing– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]
Get Instant Quotations, Fill the Enquiry form:
What is the LM-79 Testing of LED Lights?
LM-79 Testing for LED Lights
LM-79 is an approved method for taking electrical and photometric measurements of SSL products. It covers total flux (light output), electrical power, efficacy, chromaticity, and intensity distribution. The five required metrics on the LED Lighting Facts label come from LM-79 testing results.
ITCIndia Offering you a complete choice of services which include LM 79 Testing, Safety Testing, Electrical Testing, IEC/EN/IS/BS/ISO Testing, IP testing as per IEC 60529 and Cable Gland Testing.
ITCIndia Laboratory has been awarded accreditation by the NABL under the Energy Efficient Lighting Products Program. This includes LM-79 accreditation for Solid State Lighting Luminaires – Total Flux Measurements (Luminous Efficacy) and Solid State Lighting Luminaires –Luminous Intensity Measurements.
Our accreditation also includes IES LM-80:2008 for Solid State Lighting Luminaires-Lumen Maintenance (SSL Life Tests).
ITCIndia laboratory is also on the LED Lighting Facts Approved Labs List.
ITCIndia can do safety testing against below international standard like
- IEC 61010-1 : lab instruments
- IEC 60204-1 : COntrol panel
- IEC 60595 : LED luminary
- IEC 61347 : Lamp control gear
- IEC 60950 : Information technology equipments
- IEC 60601 : Electromedical equipmets
- IEC 60065 : Audio video & similar product
- IEC 61439 : Low voltage switchgear & control gear assemblies
- IEC 60034 : rotating electrical machine and more contact us for more information…
LM-79 Definition and Scope
IES LM-79 is an approved method for testing electrical and photometric measurements of solid-state lighting products. LM-79 contains procedures for performing reproducible measurements of LEDs properties, including: total flux, electrical power, efficacy and chromaticity.
The scope of LM-79 applies to LED products that incorporate control electronics and heat sinks. This covers complete LED luminaires and integrated LED sources. It does not include bare LED chips or LED based products without a light source.
LM-79 testing requires complete luminaire testing on an absolute photometric basis. Typically lighting products are evaluated on a relative photometric basis, where separate tests are done for lamps an luminaires. However, for solid state lighting products the LED lamps typically cannot be separated from their luminaires. The absolute photometric testing required measures the light distribution and light intensity of the complete luminaire.
LM-79 Procedures and Conditions
- Ambient Conditions
- Maintain temperature at 25 degrees C +/-1 degree C (within 1M)
- Mounting – limit thermal transfer
- Limited air flow
- Power Supply
- AC waveshape limit to harmonic RMS of 3%
- Voltage regulation to +/- 2%
- Seasoning and Stabilization
- Testing Orientation
- Electrical Settings
- Instrumentation
LM-79 Testing Methods
Integrating sphere systems are used to measure the total luminous flux and color for LM-79. This can be performed with a photometer (total luminous flux) or a spectral radiometer (spectral radiant flux). Utilizing a spectral radiometer and integrating sphere is the preferred method, which derives total luminous flux and color qualities form spectral radiant flux measurements.
Goniophotometer systems are also used for LM-79 testing to measure luminous intensity distribution. The Goniophotometer system tests derive total luminous flux and provide color characteristics including CCT and CRI.
LM-79 Test Outputs and Calculations
- Total Luminous Flux
- Luminous Intensity Distribution
- Electrical Power
- Luminous Efficacy
- Chromaticity
- CCT
- CRI
For your better understanding, we are going to show you the LM-79 test report of latest LED in the following:
Learn more about this Lm-79 test >
If you’re Buyers Demanding for LM-79 Testing for LED Lights– Contact Now!
Wish this blog post will be help. If you have any other questions, please feel free to contact us. ITCIndia team looking forward work with you and get better together!
Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]
Get Instant Quotations, Fill the Enquiry form:
LED OT light Testing
LED OT light Testing laboratory
If you are looking for LED OT light Testing Laboratory in India, ITC India Can Help You! ITC India one of the best LED OT light Testing Service Provider in India. ITCIndia Can do LED OT light Testing as per IEC 60601-1 Standard
LED Operation Theater Lights
Applicable Standards:
- IEC 60601-1
Essential Tests:
- Power input
- Protection against accidental contact
- Leakage current and patient auxiliary current
- Voltage drop test
- Touch current
- Earth Leakage Current
- Dielectric Strength Test
- Insulation Resistance
- Humidity preconditioning treatment
- Single fault condition
- Resistance to environmental stress
- Creepage and air clearance
- Pollution degree classification
- Protection against mechanical hazards
- Stability tests
- Protection against excessive temperature and other hazards
- Ingress protection tests like IP 20
- Push test , impact test
- Drop test
Snapshot of the LED OT light Test report issued: Total no of pages of full report is 122
If you’re Buyers Demanding for LED OT light Testing– Contact Now!
ITC India has around 5000 clients from LED OT light division from All over India.
If you are interested to Get
LED OT light Test Test Report, You can Please feel free to Ask for Quotation.
Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]
Get Instant Quotations, Fill the Enquiry form:
Solar Fence Energizer Testing
Solar Fence Energizer Testing
If you are looking for Solar Fence Energizer Testing, ITC India Can Help You! ITC India NABL Accredited Laboratory one of the best Solar Fence Energizer Testing Service Provider in India.
Standards:
- IEC 60335-2-76
- IS 302-2-76
Essential test:
- Protection against Electrical shock
- Electrical insulation at operating temperature
- Moist resistance
- Insulation resistance and electric strength (after humidity treatment)
- Stability and mechanical hazards
- Mechanical strength
- Constructions
- Internal Wiring
- Components
- Cord grip and cord guard
- Terminals for external conductors.
- Provision for earthing
- Screws and connections
- Creepage distances and clearances
- Resistance to heat fire and tracking
Test Report of the tested solar fence energizer: Full report is of 40 pages.
If you’re Buyers Demanding for Solar Fence Energizer Testing– Contact Now!
ITC India has around 5000 clients from Solar Fence Energizer division from All over India.
If you are interested to Get
Solar Fence Energizer Test Report, You can Please feel free to Ask for Quotation.
Mr. Puneet Sharma | Call: 08196980555 | E-mail: [email protected]
Get Instant Quotations, Fill the Enquiry form:
LED Lights Testing
LED Lighting Testing Laboratory
If you are looking for LED Testing for LED Lights, ITC India Can Help You! ITC India NABL Accredited Laboratory one of the best LED Light Testing Service Provider in India, ITC India Can Do Endurance & Temperature Testing, IP 65 Testing, IP 66 Testing, IP 67 Testing, IS 15885 (P2/S13) Testing, IS 16104 Testing, LM 79/IS 16106 Testing Luminaire Testing, and etc..
ITCIndia discipline of Electrical (T-1811), Electronics (T-3509) and photometry (T-3510), serving its satisfied customers for last 5 years. Laboratory is fully equipped with the highly accurate Machines to test Endurance & Temperature Testing, IP 65 Testing, IP 66 Testing, IP 67 Testing, IS 15885 (P2/S13) Testing, IS 16104 Testing, LM 79/IS 16106 Testing, Luminaire Testing and etc. It owns Integrating sphere as well as Goniophotometer.
The Testing to be conducted is as follows:-
| S.NO. | PRODUCT | Testing as per standard | No of Samples |
| 1. | LED Light | Endurance and Temperature Testing | 01 |
| IP 65 | 02 | ||
| IP 66 | 02 | ||
| IP 67 | 02 | ||
| IS 15885 (P2/S13) | 17 | ||
| IS 16104 | 02 | ||
| Testing to be conducted under LM 79/IS 16106
a. Measurement of Total Luminous Flux & Luminous Efficacy b. b. Color Characteristics (Chromaticity Coordinates, Correlated Color Temperature & Color Rendering Index)
|
01 | ||
| c. Light Intensity Distribution Testing
|
01 |
Note:
- 1. Service Tax @ 15% will be applicable & charged over and above the Testing Fees.
- LM 79 Test Report will be on basis of 30 Minutes to 2 Hrs Stabilization Time depending upon the size of the Luminaire.
- Test Report of LM 79 with NABL Logo can only be issued for LED Lamps & Tube Lights only,
