Electrical Testing Service in Morbi

Electrical Testing Service

Posted on Updated on

Owing to the rich industrial experience and expertise in this domain, we are instrumental in providing Electrical Testing Service. This Electrical Testing Service is known for its high reliability and excellent rates.

We are NABL approved Testing Laboratory (with Certificate No. T 1811 attached herewith) with specialization to test against EN and IEC standards for electrical safety leading to CE/NIST/IEC certification.

Our Lab is fully equipped with high accuracy measuring  testing Instruments and trained personal to provide testing & certification services for different type of products according to IEC Standards. Some of which are IEC 60335–1, IEC 60601, IEC 61010, IEC 60204, IEC  60598, IEC 60950, IEC 61427, BS EN 50262, etc.
The laboratory is following the procedure as required by International Standard IEC/ISO 17025 and is already certified for IEC/ISO 17025 by NABL. ITC India performing Electrical Safety Testing for the following:

  1. EMC/EMI Testing
  2. Machinery Safety Testing
  3. Luminaries and Lightning Testing
  4. Electro Medical Equipments Testing
  5. Laboratory Equipment Testing
  6. Household Appliances Testing
  7. IT and Telecom Equipment Testing
  8. Environmental Testing
  9. Battery Testing
  10. LM 79 Testing

 

Laboratory & Measuring Instruments Testing:`

ITC can do Electrical Safety testing against Laboratory & Measuring Instruments equipments for following types of products/standards:
Popular standards for Laboratory & Measuring Instrument Product testing are IEC 61010.
Electrical control equipment, Electrical microscopes, Power supply, Auto transformer, Electrical laboratory equipment, Signal generators, Transducers, Transmitters
Popular standards for Laboratory & Measuring Product testing are IEC 61010.
General Safety Testing for Luminaries
Testing in Single Fault condition
Marking & Documentation
Protection against electric c shock
Determination of Accessible parts
Protective Bonding
Creepage and Clearances distances
Drop Test
Protection By Interlocks

Electro Medical Equipment Testing

Electro Medical Equipments Testing:
ITC can do Electrical Safety testing against Electro Medical equipments for following types of products/standards:
Popular standards for Electro Medical Product testing are IEC 60601-1, IS 13450 etc
General Safety Testing for Electro Medical
Power Input
Marking & Instruction
External and internal wiring
Resistance to environmental Stress
Instability hazards
Creepage and Clearances distances
Determination of Accessible Parts
Protective earthing, functional earthing and potential equalization of ME EQUIPMENT
Leakage currents and patient auxiliary currents
For List of standards under 60601
List of Major standards under Electro Medical
Medical Electrical Equipment – Part 1 : General Requirements For Safety 2 : Collateral Standard : Electromagnetic Compatibility – Requirements And Tests
IEC 60601-1-2

Medical Electrical Equipment – Part 2-5: Particular Requirements For The Basic Safety And Essential Performance Of Ultrasonic Physiotherapy Equipment
IEC 60601-2-5

Medical electrical equipment – part 2: particular requirements for the safety of electrically operated hospital beds
IEC 60601-2-38

Medical electrical equipment – part 2-21: particular requirements for the basic safety and essential performance of infant radiant warmers
IEC 60601-2-21

Medical Electrical Equipment – Part 1 : General Requirements For Safety 2 : Collateral Standard : Electromagnetic Compatibility – Requirements And Tests
IEC 60601-1-2

LM79 Testing Service

We can do the testing of your LED product against the different standard like LM 79, IS 16106, IEC 60598-1, IEC 61347-2-13, IEC 62384, IEC62722-2-1, IEC 62031, IS 15885(part2/sec13), IS 16103, IS 16102, IEC 62612, and IEC 60969 etc
Pay Mode Terms: D/P (Documents Against Payment), T/T (Bank Transfer), Other

Electrical Safety Testing Service

Owing to the rich industrial experience and expertise in this domain, we are instrumental in providing Electrical Testing Service. This Electrical Testing Service is known for its high reliability and excellent rates.
we are NABL approved Testing Laboratory (with Certificate No. T 1811 attached herewith) with specialization to test against EN and IEC standards for electrical safety leading to CE/NIST/IEC certification.
Our Lab is fully equipped with high accuracy measuring testing Instruments and trained personal to provide testing & certification services for different type of products according to IEC Standards. Some of which are IEC 60335–1, IEC 60601, IEC 61010, IEC 60204, IEC 60598, IEC 60950, IEC 61427, BS EN 50262, etc…..
The laboratory is following the procedure as required by International Standard IEC/ISO 17025 and is already certified for IEC/ISO 17025 by NABL.ITC INDIA performing ELECTRICAL SAFETY TESTING for the following:
· EMC/EMI Testing Machinery Testing Luminaries and Lightning Testing Electro Medical Equipments Testing Laboratory Equipment Testing Household Appliances Testing IT and Telecom Equipment Testing Environmental Testing Battery Testing. LM 79

LM79 Testing in India

wing to the rich industrial experience and expertise in this domain, we are instrumental in providing Electrical Testing Service. This Electrical Testing Service is known for its high reliability and excellent rates.
we are NABL approved Testing Laboratory (with Certificate No. T 1811 attached herewith) with specialization to test against EN and IEC standards for electrical safety leading to CE/NIST/IEC certification.
Our Lab is fully equipped with high accuracy measuring testing Instruments and trained personal to provide testing & certification services for different type of products according to IEC Standards. Some of which are IEC 60335–1, IEC 60601, IEC 61010, IEC 60204, IEC 60598, IEC 60950, IEC 61427, BS EN 50262, etc…..
The laboratory is following the procedure as required by International Standard IEC/ISO 17025 and is already certified for IEC/ISO 17025 by NABL.ITC INDIA performing ELECTRICAL SAFETY TESTING for the following:
· EMC/EMI Testing Machinery Testing Luminaries and Lightning Testing Electro Medical Equipments Testing Laboratory Equipment Testing Household Appliances Testing IT and Telecom Equipment Testing Environmental Testing Battery Testing. LM 79

IP Testing

IP Testing labs in India : IP Testing As Per IEC 60529 ITC can do Electrical Safety testing against IP Testing for following types of products/standards:
We have developed a special testing facility against Solid particle protection & Liquid ingress protection generally called as the IP testing. We have below test facility at present in our;
1. IP 1X, IP 2X, IP 3X, IP 4X for protection of machine against Penetration by solid foreign objects
2. IP 5X for Dust Protection
3. IP 6X for Dust Protection
4. IP X3, IP X4, IP X5, IP X6, IP X7 & IP X8 for protection against ingress of water.

OVERVIEW OF COMMONLY SOUGHT IP CODES
1X    protection against objects >50mm    X1    protection against vertically Dripping water
2X    protection against objects >12.5mm    X2    dripping water at -15° from vertical
3X    protection against objects >2.5mm    X3    protection against spraying water
4X    protection against objects >1mm    X4    protection aginst splashing water
5X    Dust Protected ( limited ingress)    X5    protection aginst low pressure jetting water
6X    Dust tight protection    X6    protection against high pressure jetting water
IP(Ingress Protection) Testing
Ingress protection (IP) testing at ITC India NABL accredited Electrical Safety Testing laboratory can determine a products susceptibility to solid particle (including dust) ingress and liquid ingress (water).

Protection of the tests specified in : the following standard :-
1. IEC 60529
2. BS EN 60529
This classification system utilize the “IP” (“Ingress Protection”) normally followed by two digits:
1. Ingress Protection of (IP) Ratings (Solid ingress)
2. Ingress Protection (IP) Ratings (Liquid ingress)
Purpose:
The testing will access the protection of the equipment against ingress of solid bodies and/or liquids, varying over differing degrees of protection, depending upon the requirements you place on your product.
Protection against solid/dust entry:
The test specified in the first digit of the Protection Index (IP1X, IP2X, IP3X, IP4X, IP5X, IP6X), meaning protection against solid particles and dust entry into the fixture according to the BS EN 60598-1 IEC 60598 – 1, IEC 60529.
1. IP1X Protection against solid object greater than 50mm diameter2. IP2X Protection against solid objects diameter exceeding than 12.5 mm
3. IP3X Protected against solid objects exceeding  than 2.5 mm diameter
4. IP4X Protected against solid objects exceeding than 1.0 mm diameter
5. IP5X Dust Protected
6. IP5X Dust tight (with a vacuum applied to the product)
Protection Index Against Water entry:

1. IPX1 Protected against dripping water
2. IPX2 Protection against dripping water at tilted to 15 degrees
3. IPX3 Protected against spraying water
4. IPX4 Protected against splashing water
5. IPX5 Protected against water jets

6. IPX6 Protected against powerful water jets
7. IPX7 Temporary immersion in the waterh position to prevent satisfactory operation of the item or to present a safety risk 8. IPX8

Photometric Testing

Major tests facility:
Marking Durability
Accessibility Test
Protection against Electric Shocks
Power I/P & Current
Heating/ Temperature Rise
Leakage Current
Di-Electric strength
Transient Impulse overvoltages
Moisture Resistance
Leakage current and Electric strength
Endurance
Abnormal Operation
Stability & Mechanical Hazards
Mechanical strength
Ingress Protection
Provision for Earthing
Creepage & Clearance
Resistance to heat and fire
Resistance to rusting
Creepage distances and air clearances
Instability hazards

Product – Electrical Testing Service

Testing Services (Core Areas):
ITC can do Electrical Safety testing against below international standard like:
IEC 61010-1 : Lab Instruments
IEC 60204-1 : Control Panel
IEC 60595 : LED luminary
IEC 61347 : Lamp control gear
IEC 60950 : Information technology equipments
IEC 60601 : Electromedical equipments
IEC 60065 : Audio video & similar product
IEC 61439 : Low voltage switchgear & control gear assemblies
IEC 60034 : rotating electrical machine and more contact us for more information…
Major Area    Generic Standards
Solar    IEC/EN 61215
Luminaries    IEC/EN 60598/IS 10322
Information Technology equipment    IEC/EN 60950/IS 13252
EMC/EMI    IEC/EN 61000/IS 14700
Photometry    LM79/IS 16106
Machinery    IEC/EN 60204
Battery    JIS 8702-1/IS 13369, IEC 61427, IEC 60896, IS 5054, IS 15549
Electro Medical    IEC/EN 60601/IS 13450-1
Household equipments    IEC/EN 60335/IS 302
Laboratory equipments    IEC/EN 61010
Environmental testing    IEC/EN 60068/IS 9000
Cable glands    BS EN 6121/EN 50262/IEC 62444
Ingress Protection    IEC 60529
Audio/Video Appliance    IEC 60065

Environmental Testing Services

Environmental Testing Services:
ITC can do Electrical Safety testing against Environmental Testing equipment against following types of products/standards:
Types of Tests
Applicable Standards
Dry heat test
IS 9000 pt (III); IS 9000(part- 3) ; IS 1248 ; IS 13779 ; IEC 60068-2-2
Dry Cold test
IS 9000 pt- (II) ; IS 1248 ; IS 13779 ; IEC 60068-2-1
Damp heat test (Steady state)
IS 9000 pt (IV); IS 13779 ; IS 1534; IEC 60068-2-78
Damp heat test (Cyclic)
IS 9000 Pt(V); IEC 60068-2-30
Damp heat test (Composite)
IS 9001-4
Composite temperature/Humidity Cyclic test
IEC 60068-2-38
Temperature cycling/change of temperature
IS 9000 Pt (XIV); IEC 60068-2-14
Impact test
(IK01, IK02, IK03, IK04, Ik05, IK06, IK07, IK08, IK09, IK10)
IEC 62262 ; IEC 60068-2-75 ; IEC 62208; IEC 62275; IS 8828 ; IS/IEC 60898-2 ;
IEC 60898-1 ; IS 12640 (Part 1) / IEC 61008-1 ; IS 12640 (Part 2) / IEC 61009-1 ;
IEC 61008-2-1 ; IEC 61009-2-1 ; IEC 61330
Dust test Ingress of protections (Degrees)
(IP 1X, 2X, 3X, 4X, 5X, 6X
IP X3, X4, X5, X6, X7, X8)
IS 9000 Pt (XII); IS/IEC 605

Battery Testing

ITC can do Electrical Safety testing against Battery Testing for following types of products/standards:
As per IS 1651
As per IEC: 60896-11
a. Verification of Constructional Requirement
a. Capacity test
b. Marking & Packing

Cable Gland Testing

ITC can do Electrical Safety testing against Cable Gland Testing for following types of products/standards:
BS 6121: Specification for mechanical cable glands for elastomer and plastics insulated cables, IEC 62444: Cable glands for electrical, BS EN 50262: Cable glands for electrical installations Test carries out under this standard. installations
Cable retention test
Cable anchorage test
Cable anchorage twist test
Impact test
Torque test
Ingress protection (IP) test
Electrical continuity test
Insulation resistance test and more…

Photovoltatc (PV) Modules Testing

ITC can do Electrical Safety testing against Photovoltaic (PV) Modules equipment for following types of products/standards:
(Photovoltaic modules, Sun cubes, etc.)
Popular standards for Photovoltaic (PV) Modules Product testing are IEC 61215 & IEC 62108
General Safety Testing for Luminaries
Visual Inspection
Insulation Test
Thermal Cycling
Humidity Freeze
Damp Heat
Wet Leakage Current Test

Consumer Household Commercial Appliance Equipment Testing

ITC can do Electrical Safety testing against Consumer, Household, and Commercial Appliance Equipment equipment for following types of products/standards:
Electric Iron, Warming plates, Electric Kitchen Machines, Refrigerators, Room Heaters, Electric Immersion, Water Heater, Electric Stoves, Vacuum Cleaners and Water-Suction Cleaning Appliances
Popular standards for Consumer, Household & Commercial Appliance Equipment Product testing are IEC 60335-1:2010-05, IS:302-1: 2008, IS 302-2-12: 1993, IS 302-2-14: 1994, IS 302-2-24: 1994, IS 302-2-30: 2007, IS 302-2-201:2008, IS 302-2-202:1992, EN 60335-1:2010, IS 4250:1980, IEC/EN 60335-2-2, IEC/EN 60335-2-3, IEC/EN 60335-2-12, IEC/EN 60335-2-14, IEC/EN 60335-2-30, IEC/EN 60335-2-89 etc
General Safety Testing for Luminaries
Classification
Marking & Instruction
Power I/P & Current
Leakage Current and electric strength at operating temp
Stability & Mechanical Hazards
Internal Wiringg
Creepage & Clearance
Resistance to heat and fire
Temperature withstand test for bowl

Information Technology Testing IT Equipment Testing

ITC can do Electrical Safety testing against Information Technology Instruments equipments for following types of products/standards:
Popular standards for Information Technology Product testing are IEC 60950.
(Monitor , SMPS, Network card ,UPS, Computer, Modem ,Cable tester , Balance, Refrigerated enclosure)
Popular standards for Information Technology Product testing are IEC 60950
General Safety Testing for Luminaries
List of critical components
Electrical data
Durability
Access to energized parts
Limited power source measurement
Protection against hazardous moving parts
Stability
Drop Test
Touch current and protective conductor current
Impulse test

LM79 Electrical Testing Service

Item Code: ITC-05
As the development of LED technology continues to grow and diversify, the need for consistent and standardized testing procedures for LED has become more prevalent than ever. Light Laboratory is an NIST NVLAP Accredited testing for

ITC India has made strides to stay current with the new testing standard LM-79 set forth by the IESNA (Illuminating Engineering Society of North America). In addition, “IN-SITU” testing is now a priority when testing our LED light systems for more reliable results. Fixtures tested by LM-79 standards will now feature a Lighting Facts label provided through the program created by the U.S. Department of Energy.

As the development of LED technology continues to grow and diversify, the need for consistent and standardized testing procedures for LED has become more prevalent than ever. ITC INDIA is an NABL Accredited testing for LM-79 IEC/EN 60598.
Light Laboratory has made strides to stay current with the new testing standard LM-79 set forth by the IEC/EN 60598. In addition, ITC INDIA testing is now a priority when testing our LED light systems for more reliable results. Fixtures tested by LM-79 standards will now feature a Lighting Facts label provided through the program created by the IEC/EN.

LM-79 Electrical and Photometric Measurements of Solid-State Lighting Products
Approved method describing procedures and precautions in performing reproducible measurements of LEDs:
Total luminous flux
Electrical powers
Luminous Intensity distribution
Efficacy (lm/watt)
Chromaticity
LM-79 Scope

Applies to LED-based products incorporating control electronics and heat sinks, that is, those devices that require only AC mains power or a DC voltage power supply to operate.

Absolute Photometry Basis

LM-79 requires complete luminaire testing
Traditionally, photometric evaluation of lighting products is based on separate tests for lamps and luminaires
For SSL products, LED lamps typically cannot be separated from their luminaire because of heat effects

Relative vs. Absolute Photometry

Relative testing – Lamps of interest and luminaire are measured separately. Then the actual light distribution and intensity of the complete luminaire of interest is derived by normalization of the test data
Absolute testing – The actual light distribution and intensity of the luminaire of interest is measured directly from the complete luminaire.
LM 79 Testing in MumbaiLM 79 Testing in AhmedabadLM 79 Testing in PuneLM 79 Testing in BangaloreLM 79 Testing in ChennaiLM 79 Testing in New DelhiLM 79 Testing in LudhianaLM 79 Testing in Ambala
Minimum Order Quantity: 1 Piece
Delivery Time: 10 days
Packaging Details: 17k

Submit Your Testing Requirements,Please fill out the Enquiry below: