IP 65 testing for LED Street Light

IP 65 testing for LED Street Light, IP Testing to IEC 60529, EN 60529 and BS EN 60529,

If you are looking for IP 65 Testing Laboratory for your LED Street Lights, ITCIndia Can Do. ITC India One of the Best NABL Accredited Electrical Safety testing Laboratory in India. ITC India Provide you IP 65 Testing for your LED Street Lights in all over India like Mumbai, Ahmedabad, Pune, New Delhi, Chennai, Panchkula, Chandigarh, Mohali, Ludhiana, Ambala, Bangalore, Kolkata and etc.

Get Instant Quotation for IP 65 Testing Ingress Protection Water Dust IEC 60529, IP 65 Enclosures Rating IP IEC/EN 60529 (IP6x IPx5), IP Testing to IEC 60529, EN 60529 and BS EN 60529,

The chart below gives the specifics of what these ratings mean and how they are measured:-

IP Rating Protection Description Test Method
IP65 Enclosures Able to protect against water jets  

Water projected by a nozzle (6.3 mm) against enclosure from any direction shall have no harmful effects.

Test duration: at least 15 minutes
Water volume: 12.5 liters per minute
Pressure: 30 kPa at distance of 3 m

 

DUST TEST IP 6x

The tests are carried out by means of a dust chamber with a sealed test cabinet, in which talcum powder is kept in suspension by means of an air steam.

The talcum powder must be prepared in such a manner that it will pass through a sieve with a mesh size 0,075 mm.

The quantity of talcum given in the regulation is 2kg per cubic metre test cabinet volume.

The enclosure under test is suspended in the test cabinet and connects to a vacuum pump.

The object of the test is to draw into the enclosure, by means of depression, a volume of air 80 times the volume of the sample enclosure tested without exceeding the extraction rate of 60 volumes per hour.

In no event shall the depression exceed 2 kPa = 20mbar (approx.200 mm water column) below atmospheric pressure.

If an extraction rate of 40 to 60 volumes per hour is obtained the duration of the test is 2 hours.

If, with a maximum depression of 2 kPa (20mbar), the extraction rate is less than 40 volumes per hour, the test is continued until 80 volumes have been drawn through, or a period of 8 hours has elapsed.

We perform on-site testing on the size of any type with a chamber inflated around the object to be tested.

 

WATER TEST IP x5

The test is made using one of the two test devices described below.

Water jet hose nozzle 6.3mm ∅

Water projected against enclosure from any direction shall have no harmful effects.

The conditions to be observed are as follows:

  • n internal diameter of the nozzle: 6,3 mm ∅;
  • n delivery rate: 12,5 l/min ±5%;
  • n water pressure: 100 kPa at distance of 3 m;
  • n test duration per square metre of enclosure surface area likely to be sprayed: 1 minute;
  • n test duration: at least 3 minutes;
  • n distance from nozzle to enclosure surface: 2,5 to 3 m.

If you want details and quotations for Ip57 and Ip66 Testing, Kindly send us the following details:

  1. Product Technical Specifications
  2. Product Images
  3. product Brochure
  4. Required No of Samples 2

If you’re Buyers Demanding for IP Testing– Contact Now!

ITC India has around 5000 clients from LED lighting division from All over India.

Get IP Test Report, You can Please feel free to Ask for Quotation.

Mr. Puneet Sharma | Call: 08196980555 | E-mail: ITCIndiaOne@Gmail.Com

Get Instant Quotations, Fill the Enquiry form: